Titanium Grade 5 Round Bar

Titanium Grade 5 Round Bar

ASTM B348 gr5 Hex Bar and 6al4v Titanium Rod supplier in India

Aesteiron Steels LLP is a grade 5 titanium bar suppliers. It is being offered in different sizes and shapes to our clients. It is been manufactured by using high quality raw material with latest advance technology.
Titanium Grade 5 Round Bar is an alpha-beta titanium alloy with a high strength to weight ratio and excellent corrosion resistance. It is one of the often used titanium alloys and it is applied in a wide range of applications where excellent corrosion resistance and low density are necessary such as aerospace industries and biochemical applications.

Increased use of ti-6al-4v round bar as biomaterials is occurring due to its superior biocompatibility, lower modulus, and enhanced corrosion resistance when compared to more standard stainless steels and cobalt-based alloys.
titanium grade 5 astm b348 bar is resistant to general corrosion but may be quickly attacked by environments that can cause breakdown of the protective oxide layer including hydrofluoric, hydrochloric, sulfuric and phosphoric acids.
grade 5 titanium hex barhas a very low thermal conductivity at room temperature  6.7 - 7.5 W/m·K which contributes relatively poor machinability. It is vulnerable to cold dwell fatigue. It is alloyed with small amounts of aluminum and vanadium which is typically 6 % and 4 % respectively, by weight.
grade 5 titanium rodis heat treated to vary the amounts of and microstructure of alpha and beta phase in the alloy. The microstructure will differ significantly depending on the exact heat treatment and method of processing. Three common heat treatment processes are mill and duplex annealing, and solution treating and aging.

Titanium Grade 5 Round Bar Price list

Type Description USA FOB Price Malaysia FOB Price Europe FOB Price Singapore FOB Price Saudi Arabia (KSA) FOB Price
    Unit Per mtr Unit Per mtr Unit Per mtr Unit Per mtr Unit Per mtr
Titanium Grade 5 Round Bar Size : 45mm dia x 2-2.5mtr US $ 29.5 Malaysia Ringgit 120.07 Euro 24.78 Singapore Dollar 39.53 Saudi Riyal 110.63

Standard Specification Of grade 5 titanium bar

Specifications Chart ASTM B348/ ASTM SB348
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Size in mm
5 mm To 500 mm
Diameter in mm 0.1 mm to 100 mm
Length in mm 100 mm To 3000 mm Long & Above
Surface Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Most Famous Types Of grade 5 Titanium hex bar

Titanium Grade 5 Round Bar
grade 5 Titanium rod
6al4v titanium rod
grade 5 titanium bar
ASTM B348 Grade 5 Hex Bar
ASTM B348 gr5 Rod

Sizes of grade 5 Titanium bar stock

Specifications Chart ASTM B348/ ASTM SB348
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Size in mm
5 mm To 500 mm
Diameter in mm 0.1 mm to 100 mm
Length in mm 100 mm To 3000 mm Long & Above
Surface Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

ASTM B348 Grade 5 Rod Chemical Structure

Grade Ti C Fe Al V O
Titanium Grade 5 90 min 0.25 max 6 min 4 min 0.02 max

Ti-6al-4v Round Bar Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Of grade 5 titanium bar

STANDARD WERKSTOFF NR. UNS
Titanium Grade 5 3.7165 R56400

Titanium Grade 5 Round Bar Weight Chart

Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951
12mm 0.271 0.889 40mm 3.009 9.872
1/2" 0.303 0.994 1-5/8" 3.200 10.449
13mm 0.318 1.043 1-3/4" 3.712 12.179
14mm 0.368 1.207 45mm 3.807 12.555
9/16" 0.383 1.256 1-7/8" 4.260 13.977
15mm 0.424 1.391 48mm 4.330 14.205
5/8" 0.473 1.551 50mm 4.698 15.414
16mm 0.481 1.578 2" 4.848 15.906
17mm 0.543 1.791 2-1/8" 5.475 17.963
11/16" 0.573 1.880 2-1/4" 6.135 20.128
18mm 0.610 2.001 60mm 6.768 22.205
3/4" 0.682 2.237 2-3/8" 6.838 22.435
2-1/2" 7.576 24.856
2-5/8" 8.354 27.409
2-3/4" 9.169 30.083

ASTM B348 Grade 5 Rod tolerance

Diameter – Smooth Turned

(These are H10 tolerances, which are ‘all minus’ tolerances )

Diameter (mm) Tolerance (mm)
18 to 30 +0 / -0.084
31 to 50 +0 / -0.100
51 to 79 +0 / -0.120

Diameter – Rough Turned

(These are ‘all plus’ tolerances)

Diameter (mm) Tolerance (mm)
75 to 150 -0 / +1.5
151 to 225 -0 / +2.0
226 to 410 -0 / +3.0

Diameter – Bright Drawn

These are H9 Tolerances
H9 Tolerances are ‘all minus’ tolerances:

+0mm / – Figure in table

Diameter (mm) Tolerance (mm)
6 to 10 +0 / -0.036
11 to 18 +0 / -0.043
19 to 30 +0 / -0.052

Tolerance In Mm For Given Tolerance Number

Diameter (mm) 6 7 8 9 10 11 12 13
>1 to 3 inc. 0.007 0.009 0.014 0.025 0.040 0.060 0.090 0.140
>3 to 6 inc. 0.008 0.012 0.018 0.030 0.048 0.075 0.120 0.180
>6 to 10 inc. 0.009 0.015 0.022 0.036 0.058 0.090 0.150 0.220
>10 to 18 inc. 0.011 0.018 0.027 0.043 0.070 0.110 0.180 0.270
>18 to 30 inc. 0.013 0.021 0.033 0.052 0.084 0.130 0.210 0.330
>30 to 50 inc. 0.016 0.025 0.039 0.062 0.100 0.160 0.250 0.390
>50 to 80 inc. 0.019 0.046 0.074 0.120 0.190 0.300 0.460
>80 to 120 inc. 0.022 0.087 0.140 0.220 0.350 0.540
>120 to 180 inc. 0.025 0.100 0.160 0.250 0.400 0.630
>180 to 250 inc. 0.115 0.185 0.290 0.460 0.720
>250 to 315 inc. 0.320 0.520 0.810
>315 to 400 inc. 0.360 0.570 0.890
>400 to 500 inc. 0.400 0.630 0.970
> 500 0.440 0.700 1.100

Tolerances on cross sections

Nominal dimension Tolerance class to ISO 286-2
h6 h7 h8 h9 h10 h11 h12
over 1 up to 3 0.006 0.010 0.014 0.025 0.040 0.060 0.100
over 3 up to 6 0.008 0.012 0.018 0.030 0.048 0.075 0.120
over 6 up to 10 0.009 0.015 0.022 0.036 0.058 0.090 0.150
over 10 up to 18 0.011 0.018 0.027 0.043 0.070 0.110 0.180
over 18 up to 30 0.013 0.021 0.033 0.052 0.084 0.130 0.210
over 30 up to 50 0.016 0.025 0.039 0.062 0.100 0.160 0.250
over 50 up to 80 0.019 0.030 0.046 0.074 0.120 0.190 0.300
over 80 up to 120 0.022 0.035 0.054 0.087 0.140 0.220 0.350
over 120 up to 180 0.025 0.040 0.063 0.100 0.160 0.250 0.400
over 180 up to 200 0.029 0.046 0.072 0.115 0.185 0.290 0.460

Tolerances on length

Type of length Length Limit deviation To be stated on order
Manufacturing length 3000 to 9000 +/- 500 Length
Stock length 3000 or 6000 0, +200 eg 6000
Cut to length Up to 9000 To specifications with +/- 5 minimum Length and tolerance

Tolerances on straightness

Product form Nominal dimension Deviation
Rounds 1.0
Squares and hexagons up to 75 1.0
over 75 1.5
Flats width below 120 1.5 on width / 2.0 on thickness
width at or over 120 and w/t below 10:1 2.0 on width / 2.5 on thickness
width at and over 120 and w/t at or over 10:1 2.5 on width / 3.0 on thickness

Titanium Grade 5 Round Bar manufacturers in India

ASTM B348 gr5 Hex Bar manufacturer