Titanium Grade 2 Round Bar
- +91 22 6777 6777
- info@aesteiron.com
Aesteiron Steels LLP, is a renowned grade 2 titanium bar suppliers. Our technical team offers a best quality material which is been manufactured by using latest technology. It is been recognized across the world due to its high material strength and low weight.
Titanium Grade 2 Round Baris a pure alpha titanium round bar. With moderate strength and excellent corrosion resistance and formability, represents the most widely used form of titanium.
grade 2 titanium hex bar is typically available in the annealed condition and is readily heat treatable to increase strength, for a wide range of applications. For most applications it is typically alloyed with 6% of aluminum and 4% of vanadium, respectively, by weight.
grade 2 titanium bar stock are available in sizes of 300mm dia X 500mm length, 300mm dia X 1000mm length, 300mm dia X 2000mm length, 300mm dia X 3000mm length.
Compared to the other grades of titanium rod, grade 2 titanium rod is slightly weaker than Grade 3, but stronger than Grade 1 and equally resistant to corrosion. It is non-magnetic in nature. These properties are versatile in regard to its applications.
titanium grade 2 astm b348 bar is also used to manufacture heat exchangers and cryogenic vessels. In seawater, it is fully resistant to corrosion at temperatures up to 300°C. It is highly resistant to chemical environments including oxidizing media, organic acids, alkaline media, and compounds, aqueous salt solutions and hot gases. Its corrosion resistance holds up in liquid metals, nitric acid, bromine gas, mildly reducing acids and wet chlorine.
| Type | Description | USA FOB Price | Malaysia FOB Price | Europe FOB Price | Singapore FOB Price | Saudi Arabia (KSA) FOB Price | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | |||||||
| Titanium Grade 2 Round Bar | Size : 55mm dia x 2mtr | US $ | 16.8 | Malaysia Ringgit | 68.38 | Euro | 14.11 | Singapore Dollar | 22.51 | Saudi Riyal | 63.00 |
| Specifications Chart | ASTM B348/ ASTM SB348 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size in mm |
5 mm To 500 mm |
| Diameter in mm | 0.1 mm to 100 mm |
| Length in mm | 100 mm To 3000 mm Long & Above |
| Surface Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Titanium Grade 2 Round Bar
Grade 2 Titanium Rod
Astm B348 Grade 2 Bar
Astm B348 Gr2 Rod
Grade 2 Titanium Hex Bar
Grade 2 Titanium Bar Stock
| Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
| Grade | C | N | O | H | Ti | Fe |
| Titanium Gr 2 | 0.10 max | 0.03 max | 0.25 max | 0.015 max | bal | 0.30 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20% |
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Titanium Grade 2 | 3.7035 | R50400 |
| Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3 | 0.017 | 0.055 | 20 | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22 | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4 | 0.030 | 0.098 | 24 | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25 | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5 | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26 | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6 | 0.068 | 0.223 | 27 | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7 | 0.091 | 0.298 | 30 | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8 | 0.120 | 0.398 | 32 | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9 | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35 | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10 | 0.189 | 0.620 | 36 | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11 | 0.228 | 0.748 | 38 | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12 | 0.271 | 0.889 | 40 | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13 | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14 | 0.368 | 1.207 | 45 | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15 | 0.424 | 1.391 | 48 | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50 | 4.698 | 15.414 | |||
| 16 | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17 | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18 | 0.610 | 2.001 | 60 | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
Diameter – Smooth Turned
(These are H10 tolerances, which are ‘all minus’ tolerances )
| Diameter (mm) | Tolerance (mm) |
|---|---|
| 18 to 30 | +0 / -0.084 |
| 31 to 50 | +0 / -0.100 |
| 51 to 79 | +0 / -0.120 |
Diameter – Rough Turned
(These are ‘all plus’ tolerances)
| Diameter (mm) | Tolerance (mm) |
|---|---|
| 75 to 150 | -0 / +1.5 |
| 151 to 225 | -0 / +2.0 |
| 226 to 410 | -0 / +3.0 |
Diameter – Bright Drawn
These are H9 Tolerances
H9 Tolerances are ‘all minus’ tolerances:
+0mm / – Figure in table
| Diameter (mm) | Tolerance (mm) |
|---|---|
| 6 to 10 | +0 / -0.036 |
| 11 to 18 | +0 / -0.043 |
| 19 to 30 | +0 / -0.052 |
Tolerance In Mm For Given Tolerance Number
| Diameter (mm) | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| >1 to 3 inc. | 0.007 | 0.009 | 0.014 | 0.025 | 0.040 | 0.060 | 0.090 | 0.140 |
| >3 to 6 inc. | 0.008 | 0.012 | 0.018 | 0.030 | 0.048 | 0.075 | 0.120 | 0.180 |
| >6 to 10 inc. | 0.009 | 0.015 | 0.022 | 0.036 | 0.058 | 0.090 | 0.150 | 0.220 |
| >10 to 18 inc. | 0.011 | 0.018 | 0.027 | 0.043 | 0.070 | 0.110 | 0.180 | 0.270 |
| >18 to 30 inc. | 0.013 | 0.021 | 0.033 | 0.052 | 0.084 | 0.130 | 0.210 | 0.330 |
| >30 to 50 inc. | 0.016 | 0.025 | 0.039 | 0.062 | 0.100 | 0.160 | 0.250 | 0.390 |
| >50 to 80 inc. | 0.019 | 0.046 | 0.074 | 0.120 | 0.190 | 0.300 | 0.460 | |
| >80 to 120 inc. | 0.022 | 0.087 | 0.140 | 0.220 | 0.350 | 0.540 | ||
| >120 to 180 inc. | 0.025 | 0.100 | 0.160 | 0.250 | 0.400 | 0.630 | ||
| >180 to 250 inc. | 0.115 | 0.185 | 0.290 | 0.460 | 0.720 | |||
| >250 to 315 inc. | 0.320 | 0.520 | 0.810 | |||||
| >315 to 400 inc. | 0.360 | 0.570 | 0.890 | |||||
| >400 to 500 inc. | 0.400 | 0.630 | 0.970 | |||||
| > 500 | 0.440 | 0.700 | 1.100 |
Tolerances on cross sections
| Nominal dimension | Tolerance class to ISO 286-2 | ||||||
|---|---|---|---|---|---|---|---|
| h6 | h7 | h8 | h9 | h10 | h11 | h12 | |
| over 1 up to 3 | 0.006 | 0.010 | 0.014 | 0.025 | 0.040 | 0.060 | 0.100 |
| over 3 up to 6 | 0.008 | 0.012 | 0.018 | 0.030 | 0.048 | 0.075 | 0.120 |
| over 6 up to 10 | 0.009 | 0.015 | 0.022 | 0.036 | 0.058 | 0.090 | 0.150 |
| over 10 up to 18 | 0.011 | 0.018 | 0.027 | 0.043 | 0.070 | 0.110 | 0.180 |
| over 18 up to 30 | 0.013 | 0.021 | 0.033 | 0.052 | 0.084 | 0.130 | 0.210 |
| over 30 up to 50 | 0.016 | 0.025 | 0.039 | 0.062 | 0.100 | 0.160 | 0.250 |
| over 50 up to 80 | 0.019 | 0.030 | 0.046 | 0.074 | 0.120 | 0.190 | 0.300 |
| over 80 up to 120 | 0.022 | 0.035 | 0.054 | 0.087 | 0.140 | 0.220 | 0.350 |
| over 120 up to 180 | 0.025 | 0.040 | 0.063 | 0.100 | 0.160 | 0.250 | 0.400 |
| over 180 up to 200 | 0.029 | 0.046 | 0.072 | 0.115 | 0.185 | 0.290 | 0.460 |
Tolerances on length
| Type of length | Length | Limit deviation | To be stated on order |
|---|---|---|---|
| Manufacturing length | 3000 to 9000 | +/- 500 | Length |
| Stock length | 3000 or 6000 | 0, +200 | eg 6000 |
| Cut to length | Up to 9000 | To specifications with +/- 5 minimum | Length and tolerance |
Tolerances on straightness
| Product form | Nominal dimension | Deviation |
|---|---|---|
| Rounds | – | 1.0 |
| Squares and hexagons | up to 75 | 1.0 |
| over 75 | 1.5 | |
| Flats | width below 120 | 1.5 on width / 2.0 on thickness |
| width at or over 120 and w/t below 10:1 | 2.0 on width / 2.5 on thickness | |
| width at and over 120 and w/t at or over 10:1 | 2.5 on width / 3.0 on thickness |
grade 2 Titanium bar suppliers
