
Stainless Steel Wire
Aesteiron Steels LLP, is an established stainless steel wire suppliers, it is available in wide range of sizes with good delivery and payment terms.SS free machining wires is a steel wire that forms small chips when machined. It increases the machinability of it by breaking the chips into small pieces and this helps to avoid entanglement in the machinery. And this allows automatic equipment to run without human interaction.316 wires provide has better corrosion resistance than 304 wire. It consist 16% chromium, 10% nickel and 2% molybdenum. It is more expensive because it provides a higher corrosion resistance, specifically against chlorides and chlorinated solutions. 304 Stainless Steel Wire mesh is useful in commercial applications, like insect screening or Animal fencing; it is also popular for use in industrial applications when filtration orseparation is needed. It is a highly heat-resistant and provides good corrosion resistance too.Stainless steel ribbon wire start with round wire which is been drawn to an optimal size for flattening. It is rolled into a flat cross section during a series of rolling operations and intermediate anneals where necessary. It offers many advantages over slit coil and machined bar.SS 304 spring wire has high wear resistance widely used in Furniture Industry. It is a kind of steel wire which is produced as a raw material for the manufacture of springs, circumferential cold and without quenching (0.3-5.0 mm).Stainless Steel Welding Electrode is length of wire that is connected with a welding machine in order to generate an electric arc. Through it the current passes and produce an arc, which generates a lot of heat to melt and fuse metal for welding. It is has properties such as high strength and ductility and corrosion resistance.Stainless Steel Filler Wire grades are ER308 filler wires, ER308H filler wires, ER308L filler wires, ER308LSi filler wires, ER309L filler wires, ER309LSi filler wires, ER309LMo filler wires, ER310 filler wires, ER316L filler wires, ER316LSi filler wires, ER317L filler wires, ER318 filler wires, ER320 filler wires, ER320LR filler wires, ER347 filler wires, ER410 filler wires, ER430 filler wires, ER383 filler wires, ER385 filler wires, ER312 filler wires. Stainless Steel Bright Wire is used for weaving mesh, elongated wires, hose, wires ropes, the flame of kitchenware, filtration equipment, steel strand, spring, etc.Stainless Steel Ultra Fine Wire can be produced from 0.03mm - 0.80mm with extraordinarily tight tolerances of diameter and ovality. It has a range of tensile strengths and spools to suit the required application. It is available in soft annealed or hard drawn. It is commonly used for wires rope production, textiles, filters, or small springs.
Type | Description | USA FOB Price | Malaysia FOB Price | Europe FOB Price | Singapore FOB Price | Saudi Arabia (KSA) FOB Price | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | |||||||
stainless steel wire | Size : 2.5mm dia x 300mtr ss304 | US $ | 2.85 | Malaysia Ringgit | 11.60 | Euro | 2.39 | Singapore Dollar | 3.82 | Saudi Riyal | 10.69 |
Specifications | ASTM A580 ASME SA580 / ASTM A313 ASME SA313, AMS 5514 | |
---|---|---|
Stainless Steel Wires Group |
|
|
SS Wire Grades | 304, 304L, 316, 316L, 17-4PH | |
Stainless Steel Wires Dimensions | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 | |
SS Wire Length | Cut Lengths: 0.125" to 72" No Limit on Spooled Lengths |
|
304 SS Wires Diameter | 0.0004" to 0.040" 10 microns to 1.0 mm Other Sizes on Request |
|
Wire Density | 8.89 g/cm3 | |
|
580-750 | |
|
as standard | |
|
28-30 | |
Surface | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated | |
Tempers | Tempers range from dead soft annealed to ultra spring temper | |
welded wire mesh | Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch Roll Length: 100feet or 150feet |
|
wires mesh weaving methods | plain weave, twill weave, dutch weave | |
304 / 316 Wire Technique | Cold Rolled, hot rolled | |
304 / 316 Wire Condition | M, Y, 1/2Hard | |
Offered in a wide range of packages including: |
|
|
Wire available in form of |
|
|
Test Certificates |
|
|
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Various stainless steel wire suppliers, stockist, distributors, exporters, importers, dealers, and stockholders procure the material good deal from Aesteiron and supply in their own countries with high margin, so always buy directly from SS Wire manufacturer in India to get the best price. Contact us now for Free quote !!!
Stainless Steel Wire
304 Stainless Steel Wire Mesh
Stainless Steel Ribbon Wire
Stainless Steel Wire Rope
2mm Stainless Steel Wire
Stainless Steel Filler Wire
Grade 201 202 Stainless steel Wire
5.5mm high Stainless steel wire
16 Gauge Stainless Steel Wire
ASTM 302 Stainless Steel Spring Wires
430 Stainless steel tig welding wires
high quality galvanized Stainless Steel Wires
3mm 14 gauge stainless steel wires
1mm stainless steel wire
1.5MM SS diameter Wire
Stainless Steel Wires Mesh Size | Stainless Steel Wires Gauge Diameter | ||
---|---|---|---|
Sizes in mm | In Inch | BWG No. | Sizes in mm |
6.4 | 1/4 | BWG24-22 | 0.56- 0.71 |
9.5 | 3/8 | BWG23-19 | 0.64 - 1.07 |
12.7 | 1/2 | BWG22-16 | 0.71 - 1.65 |
15.9 | 5/8 | BWG21-16 | 0.81 - 1.65 |
19.1 | 3/4 | BWG21-16 | 0.81 - 1.65 |
25.4x 12.7 | 1 x 1/2 | BWG21-16 | 0.81 - 1.65 |
25.4 | 1 | BWG21-14 | 0.81 - 2.11 |
38.1 | 1 1/2 | BWG19-14 | 1.07 - 2.11 |
25.4 x 50.8 | 1 x 2 | BWG17-14 | 1.47 - 2.11 |
50.8 | 2 | BWG16-12 | 1.65 - 2.77 |
50.8 to 305 | 2 to 12 | At Request |
Austenitic | Martensitic |
---|---|
AL-6XN, N08367 | 410, S41000 |
201, S20100 | 416, S41600 |
204Cu, S20430 | 420, S42000 |
301, S30100 | 420lc, S42000 |
301Si, S30116 | 440A, S44002 |
302, S30200 | Custom 450 , S45000 |
302HQ, S30203 | Custom 455, S45500 |
303, S30300 | Ferritic |
303Se, S30323 | |
304, S30400 | 430, S43000 |
304V, 30400 | 430Li, 43000 |
304L, S30403 | 434, S43400 |
305, S30500 | 436 , S43600 |
309, S30908 | 444, S44400 |
310, S31000 | PH Grades |
310S, S31008 | 17-7 PH® , S17700 |
316, S31600 | 17-4 PH® , S17400 |
316, S31600 | PH 15-7Mo®, S15700 |
316Ti, S31635 | A286 , S66286 |
317, S31700 | AM350, S35000 |
317L, S31703 | Duplex Grades |
321, S32100 | Duplex 2304, S32304 |
330, N08330 | Duplex 2205, S31803, S32205 |
347, S34700 | Duplex 2507, S32750-2 |
Carpenter ®20 CB N08020 | |
Nitronic® 30, S20400 | |
Nitronic® 32, S24100 | |
Nitronic® 33, S24000 | |
Nitronic® 40, S21904, S21900 | |
Nitronic® 50, S20910 | |
Nitronic® 60, S21800 |
Gauge A.S.W |
Diameter Inches |
Roll Thread |
Weight: Pounds/Foot Iron Steel |
Length Feet/Pound Iron Steel |
---|---|---|---|---|
0.630 0.625 0.562 0.500 |
1.0588 1.0420 0.8425 0.6669 |
0.94 0.96 1.19 1.50 |
||
7/0 | 0.490 0.464 |
1/2-20 |
0.6405 0.5743 |
1.56 1.74 |
6/0 | 0.462 0.445 0.441 0.437 |
1/2-13 1/2-12 |
0.5694 0.5283 0.5188 0.5094 |
1.76 1.86 1.93 1.96 |
5/0 | 0.430 0.401 |
7/16-20 |
0.4932 0.4290 |
2.03 2.33 |
4/0 | 0.394 0.386 0.375 |
7/16-14 |
0.4141 0.3975 0.3751 |
2.41 2.52 2.67 |
3/0 | 0.362 0.345 |
3/8-24 |
0.3496 0.3175 |
2.86 3.15 |
2/0 | 0.331 0.312 |
3/8-16 | 0.2923 0.2597 |
3.42 3.85 |
1/0 | 0.306 |
0.2498 |
4.00 | |
1 | 0.283 0.272 |
5/16-24 5/16-18 |
0.2136 0.1974 |
4.68 5.07 |
2 | 0.262 0.250 |
0.1831 0.1667 |
5.46 6.00 |
|
3 | 0.244 0.228 |
1/4-32 |
0.1588 0.1387 |
6.30 7.21 |
4 | 0.225 0.212 |
1/4-28 1/4-20 |
0.1350 0.1199 |
7.40 8.34 |
5 | 0.207 |
0.1143 |
8.75 |
|
6 |
0.192 0.190 0.187 0.186 |
12-28 12-24 |
0.09834 0.09630 0.09328 0.09229 |
10.17 10.38 10.72 10.84 |
7 |
0.177 0.167 |
10-32 |
0.08357 0.07440 |
11.97 13.44 |
8 |
0.162 0.160 0.156 |
10-24 |
0.07001 0.06829 0.06492 |
14.28 14.64 15.40 |
9 |
0.148 0.144 0.141 |
8-36 8-32 |
0.05843 0.05532 0.05303 |
17.11 18.08 18.86 |
10 | 0.135 0.125 |
0.04862 0.04168 |
20.57 23.99 |
|
11 | 0.120 0.115 |
6-40 6-32 |
0.03841 0.03528 |
26.03 28.35 |
12 | 0.105 0.096 0.094 |
5-40 4-48 4-40 |
0.02941 0.02458 0.02357 |
34.00 40.68 42.43 |
13 |
0.092 |
4-36 | 0.02258 |
44.29 |
14 | 0.080 |
0.01707 |
58.57 |
|
15 | 0.072 | 0.01383 | 72.31 | |
16 | 0.062 | 0.01025 | 97.52 | |
17 | 0.054 | 0.007779 | 128.56 | |
18 | 0.048 | 0.006146 | 162.70 | |
19 | 0.041 | 0.004484 | 223.00 | |
20 | 0.035 | 0.003268 | 306.02 |
Wires Diameter(mm) | Aperture (mm) | Mesh | Length(M) | Weight (Kg) |
---|---|---|---|---|
4.00 | 40 | 0.58 | 30 | 142 |
4.00 | 30 | 0.75 | 30 | 182 |
4.00 | 25 | 0.87 | 30 | 213 |
3.2 | 25 | 0.87 | 30 | 141 |
3.2 | 20 | 1.1 | 30 | 169 |
2.6 | 20 | 1.12 | 30 | 116 |
2.6 | 18 | 1.23 | 30 | 127 |
2.6 | 15 | 1.44 | 30 | 173 |
2.0 | 15 | 1.49 | 30 | 92 |
2.0 | 12 | 1.8 | 30 | 110 |
2.0 | 10 | 2.12 | 30 | 127 |
2.0 | 8 | 2.54 | 30 | 155 |
1.8 | 7 | 3 | 30 | 149 |
1.8 | 6 | 3.25 | 30 | 161 |
1.6 | 7 | 3 | 30 | 117 |
1.6 | 6 | 3.35 | 30 | 131 |
1.6 | 5 | 3.85 | 30 | 150 |
1.6 | 4 | 4.5 | 30 | 176 |
1.6 | 3 | 5.5 | 30 | 215 |
1.4 | 6 | 3.5 | 30 | 105 |
1.4 | 5 | 4 | 30 | 120 |
1.4 | 4 | 4.7 | 30 | 140 |
1.2 | 8 | 2.7 | 30 | 59 |
1.2 | 7 | 3.1 | 30 | 68 |
1.2 | 6 | 3.5 | 30 | 77 |
1.2 | 5 | 4 | 30 | 88 |
1.2 | 4 | 4.9 | 30 | 99 |
1.2 | 3 | 6 | 30 | 132 |
1.0 | 6 | 3.6 | 30 | 55 |
1.0 | 5 | 4.25 | 30 | 65 |
1.0 | 4 | 5 | 30 | 76 |
1.0 | 3.2 | 6 | 30 | 92 |
1.0 | 3 | 6.35 | 30 | 97 |
1.0 | 2.18 | 8 | 30 | 122 |
0.8 | 2.83 | 7 | 30 | 68 |
0.8 | 2.38 | 8 | 30 | 78 |
0.8 | 2.2 | 8.5 | 30 | 83 |
0.8 | 2 | 9 | 30 | 88 |
0.8 | 1.75 | 10 | 30 | 98 |
0.8 | 1.5 | 11 | 30 | 108 |
0.8 | 1.3 | 12 | 30 | 118 |
0.7 | 1.4 | 12 | 30 | 90 |
0.7 | 1.84 | 10 | 30 | 75 |
0.6 | 1.21 | 14 | 30 | 77 |
0.6 | 1.52 | 12 | 30 | 66 |
0.6 | 1.94 | 10 | 30 | 55 |
0.5 | 1.3 | 14 | 30 | 54 |
0.5 | 1.09 | 16 | 30 | 61 |
0.5 | 0.9 | 18 | 30 | 69 |
0.5 | 0.77 | 20 | 30 | 76 |
Chemical Composition | Specifications | Designations | Key Features | Typical Applications | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ASTM A313 ASTM A580 BS 970 BS 2056 |
W.NR 1.4301 W.NR 1.4307 UNS S30400 AWS 161 |
Good mechanical properties and corrosion resistance. | Springs. Engineered components. Wire mesh. Wire cloth. Hose braiding. |
Density | 8.0 g/cm³ | 0.289 lb/in³ |
Melting Point | 1454°C | 2650°F |
Coefficient of Expansion | 18.2 μm/m °C (20 – 100°C) | 10.1 x 10-6 in/in °F (70 – 212°F) |
Modulus of Rigidity | 70.3 kN/mm² | 10196 ksi |
Modulus of Elasticity | 187.5 kN/mm² | 27195 ksi |
Condition as supplied by Alloy Wire | Type | Temperature | Time (Hr) | Cooling | |
---|---|---|---|---|---|
°C | °F | ||||
Annealed or Spring Temper | Stress Relieve | 250 | 480 | 1 | Air |
Condition | Approx. tensile strength | Approx. operating temperature | ||
---|---|---|---|---|
N/mm² | ksi | °C | °F | |
Annealed | 600 – 800 | 87 – 116 | -200 to +300 | -330 to +570 |
Spring Temper | 1300 – 2200 | 189 – 319 | -200 to +300 | -330 to +570 |
ss 304L wire for cold heading:
1) soft or hard;
2) in coil or spool;
3) pickled or bright finish.
Specifications of Stainless Steel Bright Wire:
1. Standard: AISI, ASTM, DIN, GB, JIS, SUS
2. Grade: 201, 202, 304, 304L, 316, 316L, 316Ti, 310S, 2080, 430, 317, 347, 410, 430, etc
3. Diameter: 0.02mm-14mm
4. Condition: soft wire, semi-soft wire, hard wire
5. Length: as customers' request
6. Surface: pickled(NO.1), bright, cloudy.
7. Type: Hydrogen, Cold-drawn, Cold heading, Annealed.
Products | We supplied to following Locations |
---|---|
Grade 201 202 Stainless steel Wires | Dammam -KSA, Indonesia, Philippines, Belgium |
5.5mm high Stainless steel wires | Qatar, France, Europe, Thailand |
16 Gauge Stainless Steel Wires | Czechia, Germany, Thailand, Malaysia |
ASTM 302 Stainless Steel Spring Wires | Malaysia, USA, Bangladesh, Finland |
430 Stainless steel tig welding wires | South Africa, Saudi Arabia (KSA), Kuwait, Brazil |
high quality galvanized Stainless Steel Wires | Bahrain, South Africa, Singapore, Singapore |
3mm 14 gauge stainless steel wires | Philippines, France, Australia, UK, Nigeria | SUS304 Stainless Steel Wires | Egypt, Spain, Mexico, UK |
1mm stainless steel wires | Oman, Malaysia, Hong Kong, UAE |
1.5MM SS diameter Wires | Chile, Italy, Iran, Singapore |
high tensile steel wires 6mm | United Arab Emirates (UAE), Turkey, Norway, Malaysia |
5.5mm low stainless steel wires | Netherlands, Malaysia, Russia, Dubai |
316L Stainless Steel Ultra Fine Wires | United Kingdom -UK, Europe, Malaysia, UAE |
0.7 mm to 0.13 mm AISI Ss 410 430 Stainless Steel Scourer Wires | UK, Canada, Poland, Ellington -United States |
0.13mm ss410 stainless steel wires | Philippines, Malaysia, Canada, Singapore |
stainless steel wires coated 7X19 | Europe, Japan, Romania, Malaysia |
0.30mm-16.0mm stainless steel wires | Sweden, Colombia, Malaysia, China |
430 Stainless Steel Wires | Malaysia, Taiwan, Los Alamos -Mexico, Philippines |
1.5MM 347 Stainless Steel Wires | Singapore, South Korea, NY 12203 (USA), Malaysia |
Stainless Steel Wire manufacturers