
Quenched and Tempered Steel Plate
Quenched and Tempered Steel Plate
A514 Steel Plate
ASTM A710 Carbon Steel Plate
Q&T steel plate goes through the processes which strengthen and harden it. The process involves heating the plate and then rapidly cooling it to set the components into place as quickly as possible. This process is strictly controlled, with the heating temperature, cooling method, cooling substance and cooling speed. Its typical heating range is between 815 and 900 degrees Celsius, with extra care being taken to keeping the temperature as stable as possible. Quenched and Tempered Steel Plate becomes less brittle and more ductile without sacrificing too much hardness. It is the combination two processes that make it harder, tough and more weldable and ductile than ordinary carbon steel plate. While it takes longer duration to design, the increased strength covers up for the delay. If it becomes too hard after quenching, it can be tempered. The amount of time it is tempered is the determining factor to how much hardness is removed.
A514 Steel Plate is also known as A514 T1 Steel Plate. It is a popular quenched and tempered grade that offers high strength, weldability and machinability. Due to these properties it is typically used in applications where wear resistance and the ability to withstand high impact are important. It is heat-treated through quenching and tempering, a two-step heat treatment process that alters the grain structure of the material to increase strength, hardness and toughness. It is available in eight grades, i.e. Gr A, Gr B, Gr E, Gr F, Gr H, Gr P, Gr Q, and Gr S. ASTM A710 Carbon Steel Plate is high-yield steel grade plate that goes through age hardening to increase its yield and tensile strength. It is available in two specifications i.e. ASTM A710 Gr A (Class 1, Class 2, and Class 3) and ASTM A710 Gr B (Class 1, Class 2, and Class 3). Its applications include the manufacturing of construction equipment, jack-up rigs, truck frames, rail cars, piping components and shipbuilding.
Grades | Thickness Range | Plate Width | Plate Length |
A514 Plate | 3/16" - 6" | 48" - 120" | 48" - 120" |
A710 Plate |
Grade | A514/ A710 |
---|---|
Thickness range | 3/16" - 6" |
Types | Coils, Plates, Sheets, Strips |
Wide stock in these places | Kolkata, Vadodara, Thiruvananthapuram, Surat, Perth, Mexico, Sydney, Ahvaz, Calgary, Kuala Lumpur, Lucknow, Karachi, Hyderabad, Seoul, Ankara, Dubai, Houston, Rajkot, India, Kochi, New Delhi, Ahmedabad, Lagos, Bhubaneswar, Bangalore, Sharjah, Noida, Melbourne, Tehran, Agra, Howrah, Nashik, Bogota, London, Mysuru, Mumbai, Pune, Jamshedpur, Bengaluru, Panipat, Manama, Shah Alam, Jaipur, Doha, Pimpri-Chinchwad, Vapi, Ludhiana, Dammam, Istanbul, Muscat, Chennai, Indore, Thane, Gimhae-si, Tau, Vung Granada, Janeiro, Patna, Coimbatore, Courbevoie, Khobar, Kanpur, Singapore, Abu Dhabi, Brisbane, Kuwait, Montreal, Port-of-Spain, Ranchi, Gurgaon, Ernakulam, Gujarat, Navi Mumbai, Dhaka, Santiago, Baroda, Riyadh, Caracas, Nagpur, Jakarta |
EN10025-6 High Strength Low Alloy Quenched And Tempered Steel Plate
SA 537 Cl3 Quenched & Tempered Pressure Vessel Steel Plate
API 6A 75k High Tensile Quenched Tempered Alloy Steel Plate
Q&T Wear Resistant Steel Plate
ACME wear resistant quenched and tempered steel plate
High tensile astm a514 steel plate
Grade | Carbon | Nickel | CR | MO | CU | SI | FE | MN | NB | P | S |
---|---|---|---|---|---|---|---|---|---|---|---|
A710 - Gr A | ≤ 0.070% | 0.70 - 1.0% | 0.60 - 0.90% | 0.15 - 0.25% | 1.0 - 1.3% | ≤ 0.40% | 95.33 - 97.13% | 0.40 - 0.70% | ≥ 0.020% | ≤ 0.025% | ≤0.025% |
A710 - Gr A | Imperial | Metric |
---|---|---|
Ultimate Tensile Strength | 71,800 psi | 495 MPa |
Yield Strength | 60,200 psi | 415 MPa |
Elongation at Break (in 50 mm) | 20% | 20% |
Modulus Elasticity of Plate | 29,700 ksi | 205 GPa |
Bulk Modulus (Typical for Steel) | 23,200 ksi | 160 GPa |
Poissons Ratio | 0.29 | 0.29 |
Shear Modulus (Typical for Steel) | 116,000 ksi | 80 GPa |
EN10025-6 S890QL 1.8983 High Strength Low Alloy Quenched And Tempered Steel Plate In Quenched And Tempered Condition | USA $900.00-$1,100.00/ Ton |
SA 537 Cl3 Quenched & Tempered Pressure Vessel Steel Plate | USA $540.00-$560.00/ Ton |
AISI 4130 API 6A 75k High Tensile Quenched Tempered Alloy Steel Plate | USA $1,000.00-$1,800.00/ Ton |
Q&T Wear Resistant Steel Plate | USA $90.00-$110.00/ Square Meter |
Heat treating quenched & tempered steel plate | USA $900.00-$1,300.00/ Ton |
A514 Heat treating Q&T plate | USA $900.00-$1,300.00/ Ton |
ACME wear resistant quenched and tempered steel plate | USA $700.00-$2,000.00/ Ton |
Cold Rolled A514 Steel Plate | USA $580.00-$790.00/ Ton |
ASTM A514 Gr.F alloy steel plate | USA $800.00-$3,000.00/ Metric Ton |
High Strength Carton A514 Grade Q Steel Plate & Hot rolled AS14 Gr.Q Sheet | USA $845.00-$865.00/ Ton |
Sm570 Sm490 A709 A514 Alloy Steel Plate | USA $650.00-$700.00/ Ton |
High tensile astm a514 steel plate | USA $700.00-$1,000.00/ Ton |