P265NL EN 10216-4 alloy steel seamless tube

EN 10216-4 P265NL pipe

1.0453 Steel Pipe and TT St 35N Boiler Tube manufacturer in India

EN 10216-4 Grade p265nl Non Alloy tubes for Pressure vessel, cP255QL (TTSt 35V), 12Ni14 (10Ni14) material equivalent

P265NL EN 10216-4 alloy steel seamless tube consist carbon and also contains a small amount of hydrogen (H), manganese (Mn), nitrogen (N), oxygen (O), phosphorus (P), silicon (Si), and sulfur (S). These elements of en p265nl grade 10216-4 Alloy Steel Tubes are not intentionally added to improve the quality of steel, but are brought in by ore and smelting process, so they are called impurity elements. These impurities have a certain impact on the properties of EN 10216-4 Grade P265NL Alloy Steel Seamless Tubes. In order to guarantee the quality of steel, the chemical composition of all kinds of steel is strictly specified in technical standards.
1.0453 Steel Pipe can be heat treated at 1462°C to 1324°C. Its physical properties are mainly indicated by thermal conductivity, modulus of elasticity, electrical resistance value, specific thermal capacity, density, poison's ratio, coefficient of thermal expansion, etc.
TT St 35N Boiler Tube is used as the part of energy type equipment such as boilers, steam super heaters, steam pipelines and similar type of equipment. It can withstand load at high temperature and pressure.

EN 10216-4 Grade p265nl Non Alloy tubes are a fine grain steel for pressure purposes and are used in power engineering which is associated in the fields of industry. EN 10216-4 P265NL Seamless Alloy Steel Tubes is used as pipes in elevated pressure installations as well as in installation where it is important to ensure the appropriate resilience of steel in varying temperatures.

en 10216-4 p215nl Cold Drawn Seamless Tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. It increases the strength of the tube therefore making it very suitable for safety and performance critical applications

Standard Specification Of EN 10216-4 Grade P265NL Alloy Steel Seamless Tube

Steel grades used P215NL, P255QL, P265NL
26CrMo4-2, 11MnNi5-3, 13MnNi6-3, 12N und 14, X12Ni5, X10Ni9
Pipe lengths Pipes with precise lengths are manufactured with the following tolerance values:
- for pipes 0-6m -0/+15%
- for pipes 6-12m -0/+15%
- for pipes longer than 12m -0/to be negotiated
Tightness Pipes should be subject to water testing (7Mpa) or electromagnetic testing.
Straightness < 0,0015 of pipe length (below 3mm per every meter of pipe length)

P265NL EN 10216-4 alloy steel seamless tube price List

Types of 1.0453 Steel Pipe

EN 10216-1 P235tr1 Seamless Pipe
P235tr2 Alloy Steel Pipe
EN 10216-1 P235tr2 Alloy Steel Seamless Pipe
Low Alloy P235tr1 Seamless steel tubes
1.0453 Steel Pipe
TT St 35N Boiler Tube

Chemical Formula of TT St 35N Boiler Tube

Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.20 max 0.40 0.60-1.40 0.03 0.01 max 0.08 max 0.30 max 0.30 max 0.30 V max 0.020 Nb max 0.010 Ti max 0.040 Al min 0.020

EN 10216-4 alloy steel seamless tube Mechanical Behaviour

Manufacturer and supplier of EN 10216-4 DIN 17173 X12Ni5 (12Ni19) Seamless Alloy Steel Tubes TC1 without US testing or TC2 with US testing

Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
410 570 24

1.0453 Boiler Pipe Equivalent Material

DIN EN BS NFA ASTM ASME
EN 10216-4 Grade P265NL

Stainless Steel uns s30400 Pipes Mechanical Properties

emperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
44 - -     0.31 -  
497 284 - 43.3 333   -  
114 - 12 14.2   433 322

Tolerance of PN-EN 10216-4 Non-alloy and alloy steel tubes

Manufacturer of Cold Drawn Seamless Carbon & Alloy Steel Tubes as per En 10216-4 Grade P215nl for Pressure Purpose
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall < 12 mmWall - 12 mm + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

EN 10216-4 Grade P265NL Alloy Steel Seamless Tubes length

Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0

PN-EN 10216-4 Non-alloy and alloy steel tubes manufacturers in India

En P265nl Grade 10216-4 manufacturer