IS 3601 Pipe
- +91 22 67776700
- info@aesteiron.com
IS 3601 WT 240 Structural Tubing material is often referred to as High frequency induction steel. Which is why this particular grade of Steel IS 3601 Electric Resistance Welded Tube has been considered ideal for not only mechanical but also General Engineering Purposes. One of the more appreciated properties of the IS 3601 Carbon Steel Hot Finished Seamless Tube is that this alloy has the ability to meet the requirements of cold functioning across several industries. At Aesteiron, we manufacture as well as supply the carbon steel grade IS 3601 Pipe in the size ranging between 6 mm to 150 mm Nominal Bore (NB). Typically these CS IS 3601 Structural Tubes are manufactured for the purpose of carrying different density of materials.
For instance, our clients belonging to industries such as petrochemical, petroleum, oil and gas etc use the IS 3601 Steel Hot Finished Welded Tube in the transportation of water, gas, air and steam. Based on intended service condition, we supply and make available various grades of IS 3601 WT 210 / 240 / 310 Carbon Steel Pipe in different thickness. These specified IS 3601 Steel Tubes have been appropriately designated by us into separate classes such as Light, Medium & Heavy. Aside from having good toughness and higher tensile strength properties, the Carbon Steel IS 3601 HFW Tube has rather good resistance to corrosion. Apart from having these properties, since the carbon steel IS 3601 Pipe is made from good quality raw materials, this grade of specified IS 3601 CS Erw Pipe remains sturdy, while having accurate dimensions and a strong construction, all the same being an affordable and cost saving alternative.
IS 3601 Pipe
IS 3601 Steel Tubes
Carbon Steel IS 3601 HFW Tube
IS 3601 WT 210 / 240 / 310 Carbon Steel Pipe
IS 3601 Steel Hot Finished Welded Tube
IS 3601 Carbon Steel Hot Finished Seamless Tube
| Types | Steel Tubes for Mechanical and General Purposes |
| Standard Specification | IS 3601 |
| Grades | WT 210 / 240 / 310 |
| Wall Thickness | ± 10% of the specified thickness |
| Length | custom |
| Straightness in Tube | Max Deviation 1/600 of the total length. |
| Internal fin Height | 60% of the specified wall thickness |
| IS 3601 Seamless Pipe | Seamless Black IS 3601 WT 310 Pipes |
| Carbon Steel IS 3601 Welded Pipe | IS 3601 WT 210 Oval Pipes |
| IS 3601 Steel Erw Pipe | Carbon Steel IS 3601 WT 210 Casing Pipes |
| IS 3601 WT 240 Schedule 40 Pipe | ASME B36.19 IS 3601 Carbon Steel Pipes |
| IS 3601 WT 310 Schedule 10 Pipe | IS 3601 Double Wall Pipes |
| IS 3601 WT 210 Efw Pipe | Epoxy lined Carbon Steel IS 3601 Pipes |
| Carbon Steel IS 3601 WT 210 Round Pipe | PTFE lined Carbon Steel IS 3601 WT 210 Natural Gas Pipes |
| IS 3601 Carbon Steel Drill Pipe | IS 3601 WT 240 Grooved Pipes |
| IS 3601 Square Pipe | IS 3601 WT 310 Hydraulic Pipes |
| Carbon Steel IS 3601 Rectangular Pipe | IS 3601 WT 210 Hollow Pipes |
| IS 3601 Steel Welded Rectangular | Carbon Steel IS 3601 WT 210 Oil Pipeline |
| Large Diameter Seamless IS 3601 WT 240 Pipe | Schedule 80 Seamless IS 3601 Pipes |
| Epoxy Coated IS 3601 Carbon Steel Pipe | Cement lined IS 3601 Pipes |
| Schedule 40 Seamless Carbon Steel IS 3601 Pipe | Thin Wall Carbon Steel IS 3601 Pipes |
IS 3601 GRADE |
C% |
MN% |
S% |
P% |
WT 210 |
— |
— |
0.040 |
0.040 |
WT 240 |
— |
— |
0.040 |
0.040 |
WT 310 |
— |
— |
0.040 |
0.040 |
IS 3601 GRADE |
YST (MPA) |
UTS (MPA) |
E% |
|
OD<33.7 MM |
OD>33.7 MM |
|||
WT 210 |
MIN 210 |
MIN 330 |
12 |
20 |
WT 240 |
MIN 240 |
MIN 410 |
10 |
15 |
WT 310 |
MIN 310 |
MIN 450 |
6 |
10 |
| PRODUCTS | INDIAN STANDARD | AMERICAN STANDARD | BRITISH STANDARD | JAPANESE | GERMAN |
|---|---|---|---|---|---|
| IS | ASTM / ANSI | BS / EN | JIS | DIN | |
| Tubes | IS 3601/1984 | - | BS 1775 BS 6323/1982 | JIS G3445/1983 | DIN 2393/1994 |
| Air Heater Tubes | IS 3601/1984 | ASTM A214/1990 | BS 3059(PART 1) :1987 | JIS G3461/1984 | DIN 17177/1979 |
| General Engineering Tubes | IS 3601/1984 | - | BS 1775 BS 6323 :1982 | JIS G3445/1983 | DIN 2393/1994DIN 2394/1994 |
| Pregalva Pipes (Galva Bond) | IS 3601/1984 | - | - | - | - |
Equivalent: BS 1775 BS 6323/1982 / JIS G3445/1983 / DIN 2393/1994 Tubes
