Incoloy Alloy 825

Incoloy Alloy 825

View Incoloy 825 chemical composition, Nickel alloy 825 price per kg

Check Incoloy 825 hardness, Alloy 825 properties, CQI/IRCA approved Incoloy 825 material manufacturers

Alloy 825 is a highly corrosion resistant superalloy of chromium and nickel. The alloy has a stable microstructure that has enough nickel to resist chloride ion corrosion cracking. Resistance against acids and inducing agents are brought about by the addition of copper and molybdenum in the composition. The Incoloy 825 UNS N08825 is also resistant to oxidation, nitrates and oxidizing salts because of the addition of the chromium content. The alloy could be welded and heated in the critical sinsitisation temperature range of 650 degrees to 760 degrees Celsius without forming intergranular precipitation. This is possible because of the stabilization by the addition of titanium into the composition. The designation DIN 2.4858 used most in the sulfuric acid service applications because it is resistant to sulfuric and phosphoric acid corrosions. The material is solid solution annealed and the Incoloy 825 hardness is superior. Due to the hardness provided by the Incoloy 825 chemical composition and the heat treatment methods, the material could be used in high temperature applications such as turbine blades and jet engines as well. The Incoloy 825 properties allow it to be used in pressure vessels which undergo high pressures and have to be stronger and hard. The Incoloy 825 density is 8.14grams per centimeter cube and the melting point is 1400 degrees Celsius. This makes the alloy perform easily under very high temperatures where other elements could not be used. We offer a comprehensive Incoloy 825 price list that suits for all kinds of products and various applications. The applications of the Incoly 825 materials are seen in expansion bellows, power plants and power station ash hoppers, marine exhaust systems, ammonium sulphate vessels, electrostatic precipitator elelctrodes, calorifiers, food vessels, water and seawater vessels, sulphuric acid piping, phosphoric acid evaporators and may others. The Incoloy 825 suppliers can provide products of this alloy to suit any application.

Incoloy 825 Products

Incoloy Alloy 825 price per kg

Incoloy 825 Price US $ 20/Kg

Incoloy Alloy 825 ASTM Standard

Pipe Smls Sheet/ Plates Forging Pipe Fittings Bars Pipe Welded Tube Smls Tube Welded
B423 B424 B564 B366, B564 B425  -  -  -

Specification of Incoloy 825

Common Trade Names: Nickel 825, Incoloy 825, Nickelvac 825, Alloy 825, Nicrofer 4241
NACE MR-0175/ ISO 15156
FMC Spec: M40116, M41104, M40154

Incoloy 825 equivalent

STANDARD WERKSTOFF NR. UNS BS GOST OR JIS AFNOR EN
Incoloy 825 2.4858 N08825 NA 16 ЭП703 XH38BT NCF 825 NFE30C20DUM NiCr21Mo

Incoloy 825 Temperature Range

INCOLOY alloy 825 Temperature Range is 1600 to 2150 Degree F (870 to 1180 Degree C).

Inconel 825 Melting Point

Element Density Yield Strength (0.2%Offset) Melting Point Range Tensile Strength Elongation
Incoloy 825 8.14 g/cm3 Psi – 32,000 , MPa – 220 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 30 %

Incoloy Alloy 825 Applications & Uses

  • Chemical Processing
  • Pollution-control
  • Oil and gas well piping
  • Nuclear fuel reprocessing
  • Acid production
  • Boilers, Heat exchangers and process piping
  • Ammonia effluent cooler
  • Carburizing fixtures and retorts
  • Nuclear and power plants
  • Commercial Gas Turbines engines
  • Furnace components
  • Food Processing
  • Chemical Processing
  • Pressure vessels / Cryogenic Fuel Storage Tanks
  • Power generation industries
  • Nuclear reactors
  • Electric range heating-element sheathing

Incoloy 825 Chemical Compatibility Chart

Ni Ti Fe S Mb Cr Cu C Mn Si Al
38.0-46.0 .6-1.2 22.0 min 0.03 max 2.5-3.5 19.5-23.5 1.5-3.0 0.05 max 1.0 max 0.5 max 0.2 max

Properties of Incoloy Alloy 825

Before buying Incoloy 825 products compare Incoloy 825 thermal conductivity, hardness, chemical composition and machinability. Also check alloy 825 density, ASTM Specification

Material Form and Condition Elongation (%) Tensile Strength MPa Yield Strength (0.2% Offset) MPa
Tube/ Tubing Annealed 36 772 441
Tube/ Tubing Cold Drawn 15 1000 889
Bar / Rod Annealed 45 690 324
Plates Annealed 45 662 338
Sheets Annealed 39 758 421

Other Relevant Grades

Incoloy 825 | Alloy 825 | UNS N08825 | DIN 2.4858

Get free sample