EN8 Steel Plate
- +91 22 67776700
- info@aesteiron.com
Aesteiron is a recognised en8 plate supplier in India, it is available in all standard sizes and finishes with good delivery terms and condition.
EN8 Carbon Steel Plates has reasonable tensile strength and it is an unalloyed medium carbon steel grade. It can supply in the cold drawn or as rolled condition. It is widely used for applications which needs better properties than mild steel but does not justify the costs of an alloy steel. en8 steel platecan be induction or flame hardened in order to provide a good surface hardness with moderate wear resistance.en8 flat plateprovides great resistance to several corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress – corrosion cracking. en8 steel sheet are widely used for many general engineering applications. Typical applications include connecting rods, shafts, studs, bolts, screws, rollers, etc.EN8 Pressure Vessel Steel Plates covers carbon steel and alloy steel grades, which are designed for use in making heat exchangers, pressure vessels, boilers, and any other vessels and tanks that to store gases or liquid at high pressures.
| Type | Description | USA FOB Price | Malaysia FOB Price | Europe FOB Price | Singapore FOB Price | Saudi Arabia (KSA) FOB Price | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | |||||||
| EN8 Steel Plate | Size : 30mm x 500 x 3000 | US $ | 0.95 | Malaysia Ringgit | 3.87 | Euro | 0.80 | Singapore Dollar | 1.27 | Saudi Riyal | 3.56 |
| Sizes | from 2000 x 1000mm up to 4000 x 2000mm |
| Thickness | from 3mm up to as thick as 150mm |
| Length | 100mm to 6000mm |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Cold rolled sheet (CR), Hot rolled plate (HR) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
EN8 Steel Plate
EN8 Flat Plate
EN8 Carbon Steel Plates
EN8 steel sheet
EN8 Pressure Vessel Steel Plates
EN8D Pressure Vessel Plates
| Dimensions mm | Dimensions mm | Dimensions mm | Dimensions mm | |||
|---|---|---|---|---|---|---|
| 2500 x 1250 x 6 | 2500 x 1250 x 15 | 2500 x 1250 x 40 | 2500 x 1250 x 80 | |||
| 3000 x 1500 x 6 | 3000 x 1500 x 15 | 3000 x 1500 x 40 | 3000 x 1500 x 80 | |||
| 4000 x 2000 x 6 | 4000 x 2000 x 15 | 4000 x 2000 x 40 | 4000 x 2000 x 80 | |||
| 2500 x 1250 x 8 | 2500 x 1250 x 20 | 2500 x 1250 x 50 | 2500 x 1250 x 90 | |||
| 3000 x 1500 x 8 | 3000 x 1500 x 20 | 3000 x 1500 x 50 | 3000 x 1500 x 90 | |||
| 4000 x 2000 x 8 | 4000 x 2000 x 20 | 4000 x 2000 x 50 | 4000 x 2000 x 90 | |||
| 2500 x 1250 x 10 | 2500 x 1250 x 25 | 2500 x 1250 x 60 | 2500 x 1250 x 100 | |||
| 3000 x 1500 x 10 | 3000 x 1500 x 25 | 3000 x 1500 x 60 | 3000 x 1500 x 100 | |||
| 4000 x 2000 x 10 | 4000 x 2000 x 25 | 4000 x 2000 x 60 | 4000 x 2000 x 100 | |||
| 2500 x 1250 x 12 | 2500 x 1250 x 30 | 2500 x 1250 x 70 | ||||
| 3000 x 1500 x 12 | 3000 x 1500 x 30 | 3000 x 1500 x 70 | ||||
| 4000 x 2000 x 12 | 4000 x 2000 x 30 | 4000 x 2000 x 70 |
en8 has highertensile strength and comparatively ms material has low tensile strength. EN 8 material is applicable for high strength and MS material is not applicable for high strength. EN 8 materials is more expensive than ms material. EN 8 material can use insteadof MS material but MS material cannot use insteadof EN 8 material
EN8 is through-hardened medium carbon steel. It used to manufacture parts such as axles, shafts, gears, studs, bolts etc, and can be easily machinable.EN8D has enhanced wear resistance and it’s a carbon steel. It is a surface-hardened version of EN8 by induction processes. It is useful in general engineer and automobile components.
EN9 is better, compared to EN-8, for Low Wear rate in rotating parts.EN8 is an unalloyed medium carbon steel grade with rational tensile strength. EN8 is widely used for applications which needs better properties compared to mild steel but does not justify the costs of an alloy steel. EN9 is general engineering applications including blades for axes, knives, sickles as well as shafts, bushes, wood working drills, crankshafts, and screws.
080M40 is also known as EN8 engineering steel, it is an unalloyed medium carbon steel. It is a medium strength steel with good tensile strength and is available as normalised or rolled. It is a very popular grade of through-hardening medium carbon steel, which can be readily machinable in any condition
| Grade | C | Mn | P | S | Si |
|---|---|---|---|---|---|
| EN8 | 0.35 TO 0.45 | 0.60 TO 1.00 | 0.06 max | 0.06 max | 0.05 – 0.30 |
| Grade | HEAT TREATMENT | CORRESPONDING SPECIFICATION | |||||
|---|---|---|---|---|---|---|---|
| Hardening Temperature | Quenching Medium | Tempering Temperature | Brinell Rock well hardness | JAPAN JIS | AISI | POLDI THREAD | |
| EN-8 | 750-900 | OIL | 150-200 | – | – | – | – |
| Werkstoff | BS 970 1991 | BS 970 1955 EN | AISI/SAE |
|---|---|---|---|
| 1.1186 | 080M40 | EN8 | 1040 |
| – | 080A42 | EN8D | 1042 |
EN8 Pressure Vessel Steel Plates manufacturer
