ASTM A242 S355JOW Weathering Steel Plate stockist in Mumbai
s355j0w Plate is a weathering steel plate and is an equivalent to Corten B plate. As S355J0W steel rusts when exposed to atmospheric elements, the material builds its own protective layer which prevents the steel from further oxidation. Therefore like all weathering steels, S355J0W steel grade also offers excellent, cost effective protection against atmospheric conditions without the need for painting or external treatment. 1.8959 Steel has higher strength than any other steel grade and it has unique combination of strength and toughness. It is being worked in the annealed condition and this makes it more compatible to be formed, machined and welded. And hence it makes it more favorable for the machined purpose. S355J0W structural steel has low weight as compared to other steel and thus it can be easily carried. S355J0W Corten Steel has higher yield strength and tensile strength in the tempered and quenched condition and it has greater malleability and ductility. S355JOW+N are also resistive to corrosion due to reduction and oxidation. It is also restive to heat and crevice corrosion and can also easily resists pitting and cracking. ASTM A242 S355JOW Weathering Steel Plate allows exhibiting increased resistance to atmospheric corrosion compared to other steels. This is due to the protective layer which it forms on its surface under the influence of the weather. It is a good resistance to marine water, chemicals and different other gases. ASTM A588 S355JOW+N structural steel sheet is popularly used in outdoor sculptures for its distressed antique appearance. It is used large structural applications such as bridge and other. EN10025-5 S355J0W is very widely used in marine transportation, in the construction of shipping containers. EN 10025-5 Grade S355J0W has number of alloying elements, such as phosphorus, copper, chromium, nickel and molybdenum and it has been added to increase its resistance to atmospheric corrosion, by forming an auto-protective oxide layer on the base metal under the influence of weather conditions
Standard |
EN 10025-5 |
Grade |
S355J0W, S355J0W+N |
Category |
Atmospheric resistant steel, weathering steel |
Thickness |
1.2-150mm |
Width |
1220-4200mm |
Length |
5000-18000mm, or cut shapes as required |
Form |
Plates, sheets,coils, Plain Sheet, flat steel, section steel, H beams, bars, Perforated Sheet, Chequered Plate |
Finish |
Hot rolled plate (HR), Cold rolled sheet (CR) |
Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Grade |
Corten Steel EN 10025 S355J0W+N |
C max |
Si max
|
Mn
|
P
|
S max
|
N max
|
Addition of Nitrogen
combining elements |
Cr
|
Cu
|
0.16 |
0.50 |
0.50-1.50 |
0.035 |
0.035 |
0.009
|
-
|
0.40-0.80
|
0.25-0.55
|
Grade |
Minimum yield point (ReH Mpa *) |
Tensile strength Rm MPa |
Minimum elongation A (Lo=5.65 √So) % |
COR-TEN A |
355 |
470-630 |
20 |
|
|
rade |
Material thickness mm |
Minimum yield point (ReH Mpa *) |
Tensile strength Rm MPa |
Minimum elongation A (Lo=5.65 √So) % |
COR-TEN B |
≤16 |
355 |
470-630 |
20 |
Material # |
EN 10155 |
SEW 087 |
NFA 35-502 |
UNI |
BS 4360 |
UNE |
ASTM |
JIS G3114 |
1.8961 |
S235J2W |
WTSt 37-3 |
E 24 W 4 |
Fe 360 DK 1 |
- |
- |
- |
- |
1.8945 |
S355J0WP |
E 36 WA 3 |
Fe 510 C1K1 |
WR 50 A |
- |
- |
- |
- |
1.8946 |
S355J2WP |
- |
E 36 WA 4 |
Fe 510 D1K1 |
- |
- |
A 242 Type 1 |
- |
1.8959 |
S355J0W |
- |
E 36 WB 3 |
Fe 510 C2K1 |
WR 50 B |
- |
A 588 - A 242 Gr. 1 |
SMA 50 AW |
1.8963 |
S355J2G1W |
WTSt 52-3 |
- |
Fe 510 D2K1 |
WR 50 C |
- |
A 588 Gr. A |
to |
1.8965 |
S355J2G2W |
- |
- |
- |
- |
- |
- |
SMA 50 CP |
1.8966 |
S355K2G1W |
- |
E 36 WB 4 |
- |
- |
- |
A 709 Gr. 50 W |
- |
1.8967 |
S355K2G2W |
- |
- |
- |
- |
- |
- |
- |
|