EN 10216-3 P355N Alloy Steel Seamless Tubes

p355n tc1 steel pipe

IBR approved p355n tc1 steel pipe supplier in India

EN 10216-3 P355N TC1 Alloy Steel Seamless Tubes is a weldable fine-grained construction steel for pressure vessel construction.  It is for pressure purposes it is an alloy fine grain steel tubes which is used in elevated pressure installations and where it is necessary to assure the appropriate level of impact resistance of steel in high temperatures.

P355n TC1 is used worldwide by fabricators of welded pressure vessels, industrial boilers and heat ex-changers and is engineered to work well in elevated temperature service.
p355n is for boilers and Pressure Vessels steels, it is a normalized steel plate and sheet which is mainly used for building pressure vessels and boilers and pipes for hot liquid.
EN 10216-3 P355N Alloy Steel Seamless Tubes owned the minimum yield point at 355 Mpa for the thickness below 16mm. It is reheated and furnished in full annlealed, isothermal annealed or normalised quenched and tempered condition.
IBR approved p355n tc1 steel pipe goes through the construction code that specifies the material, fabrication, design, inspection, and testing requirements for boiler and boiler connected parts for use in India. It covers the industrial equipment in steam services such as heat exchangers, separators, steam traps, full steam piping, accumulators and similar vessels, converters, evaporators and similar vessels in which steam is generated. 

Price List of EN 10216 3 Grade P355nh Pipe

Types of en 10216 3 p355n pipes

EN 10216-3 P355N Alloy Steel Tube
EN 10216-3 P355N Seamless Hydraulic Tube
En 10216-3 Grade P355n Steel Tubes
En 10216-3 Grade P355N Seamless Steel Pipes
EN 10216-3 P355N alloy steel pipes
EN 10216-3 P355N TC1 Tube

Tolerance of EN 10216-3 P355N Alloy Steel Seamless Tubes

Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall < 12 mmWall - 12 mm + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

length of p355n tc1 steel pipe

Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0

Chemical Compostion of EN 10216-3 P355N TC1 Tube

Chemical Properties
Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.20 max 0.50 0.90-1.70 0.025 0.02 max 0.08 max 0.50 max 0.30 max 0.30 V max 0.10 Nb max 0.05 Ti max 0.04 Al min 0.020 Nb+Ti+V max 0.12

p355n tc1 steel pipe Mechanical Strength Table

Mechanical Properties
Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
490 650 22

Equivalent material of P355n tc1 steel pipe

Equivalent Designation
DIN EN BS NFA ASTM ASME
DIN 17179 Grade FGP 36 EN 10216-3 Grade P355N NFA A 49-326 Grade TU 52-BT ASTM A381 Grade Y 52 ASME SA381 Grade Y 52

EN 10216-3 P355N Alloy Steel Seamless Tubes manufacturers in India

p355n tc1 steel pipe manufacturer