EN 10084 Carbon Steel Tube
- +91 22 6777 6777
- info@aesteiron.com
EN 10084 Carbon Steel Tube cover steels with high nickel and chromium content in the low carbon alloy groups. It provides good corrosion resistance. It is made up of a case hardening steel with good hardness and good toughness.
16mncr5 en 10084 is European standard carburized steel with good hardenability and machinability. For large cross-section parts, wear resistance and high surface hardness can be obtained after heat treatment, and low-temperature impact toughness can also get high.
din en 10084 is an alloyed case hardening steel used for e.g. mechanical engineering components. In order to optimize the machinability it can be M-treated. It has satisfactory weldability, there is a possibility of cracks forming a long welds. It has high strength of 550MPa minimum tensile strength and 420MPa minimum yield strength. It has less carbon with relatively high manganese which makes it better for forming. It can be welded with filler materials and preheating.In order to avoid welding cracks post weld heat treatment can be done. It is cost effective and can be used in high corrosive and high heat applications
bs en 10084 are generally used after carburizing and quenching, and is mainly used for manufacturing gears, worms, sealing bushings and other components.
en 10084 steel is used for surface hardening when grouting, nitrocarburising, nitriding and for other types of surface chemical-thermal treatment. It is used to make gears,shafts, axles, gear wheels, levers, and boltsand other machine-building and transport components.
| Standard | AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe |
|---|---|
| Bs EN 10084 Grade C10R Welded Pipe Size | 5.0 mm – 1219.2 mm |
| Din En 10084 C16e Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Din EN 10084 Grade C16E EFW Pipe size | 5.0 mm – 1219.2 mm |
| Norme En 10084 C15e Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| EN 10084 Grade 16MnCr5 Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| EN 10084 Grade C16R Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Norme En 10084 C15e Welded Tube Size | 6.35 mm OD To 152 mm OD |
| En 10084 Steel Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| En 10084 C10e Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| Din En 10084 C16e Marking | All EN 10084 Material are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Uni En Iso 10084 Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Manufacturers of EN 10084 Grade C16E Pipe |
|
| EN 10084 Grade C16R Carbon Steel Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| EN 10084 Grade 16MnCr5 Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| Bs EN 10084 Grade C10R Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| EN 10084 Grade C16E Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| Din En 10084 C15e - 1.1141 End | Plain End, Beveled End, Treaded Pipe & Tube |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts, EN 10084 Grade 16MnCr5 Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| EN 10084 Grade C10R Carbon Steel Specialize in |
|
| Din EN 10084 Grade C16E Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| PRODUCT | SIZE | USA FOB Price | INDIA (INR) FOB Price | MALAYSIA FOB Price | EUROPE FOB Price | SINGAPORE FOB Price | SAUDI ARABIA (KSA) FOB Price |
|---|---|---|---|---|---|---|---|
| Unit per nos | Unit per nos | Unit per nos | Unit per nos | Unit per nos | Unit per nos | ||
| EN 10084 Carbon Steel Tube | 114od x 6.8mm x 5-6mtr | US$ 2.98 | INR 215.71 | Malaysia Ringgit 12.13 | Euro 2.50 | Singapore Dollar 3.99 | Saudi Riyal 11.18 |
EN 10084 Carbon Steel Tube
16mncr5 en 10084 Seamless Tube
C15E Non-alloy steel tubes
EN10084 20MnCr5 Pipe
din en 10084 Tubes
EN 10084 steel Seamless Pipe
| STEEL DESIGNATION | CHEMICAL COMPOSITION | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| SYMBOLIC | NUMERIC | C | Si max |
Mn | P max |
S max |
Cr | Mo | Ni | B |
| 18CrNiMo7-6 | 1,6587 | 0,15 ÷ 0,21 | 0,40 | 0,50 ÷ 0,90 | 0,035 | 0,035 | 1,50 ÷ 1,80 | 0,25 ÷ 0,35 | 1,40 ÷ 1,70 | - |
European |
USA |
ISO |
Japan |
||||
Standard |
Grade (Steel Number) |
Standard |
Grade (a) |
Standard |
Grade |
Standard |
Grade (b) |
EN 10084 |
16MnCr5 (1.7131) |
AISI SAE; ASTM A29/A29M |
5115 |
ISO 683-11 |
16MnCr5 |
JIS G4053 |
SCr415 |
| STEEL DESIGNATION | RANGE LIMITS | HRC HARDNESS MEASURED FROM THE QUENCHED END OF THE TEST TUBE (MM) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SYMBOLIC | NUMERIC | 1,5 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 20 | 25 | 30 | 35 | 40 | |
| 18CrNiMo7-6+H | 1,6587 | max | 48 | 48 | 48 | 48 | 47 | 47 | 46 | 46 | 44 | 43 |
42 | 41 | 41 |
| min | 40 | 40 | 39 | 38 | 37 | 36 | 35 | 34 | 32 | 31 | 30 | 29 | 29 | ||
| Europe | Material no. | DE | FR | IT | GB | ES | US | JP | FK1) |
| DIN EN ISO 683-3 | DIN 172102) | NAF 35-551 | UNI 8788 | BS 970-1 | UNE 36013 | SAE J 403/ J 1249/ J 404 | JIS G 4051 | ||
| C10E | 1.1121 | Ck 10 | XC 10 | C 10 | 045 M 10 | C 10 k | 1010 | S 10 C | A |
| C15E | 1.1141 | Ck 15 | - | C 15 | - | C 16 k | 1015 | S 15 C | A |
| C16E | 1.1148 | - | XC 18 | - | 080 M 15 | - | - | - | A |
| 16MnCr5 | 1.7131 | 16 MnCr 5 | 16 MC 5 | 16 MnCr 5 | 590 M 17 | 16 Mn Cr 5 | 5115 | - | B |
| 20MnCr5 | 1.7147 | 20 MnCr 5 | 20 MC 5 | 20 MnCr 5 | - | - | 5120 | S MnC 21 H | B |
| Execution | Size Range | OD Tolerance | Wall tolerance |
|---|---|---|---|
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm |
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) |
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm |
16mncr5 en 10084 Steel Pipe manufacturer
