
ASTM A240 UNS S31803 Plate
ASTM A240 UNS S31803 Plate is a duplex grade with a ferritic-austenitic microstructure which enables combining improved resistance to pitting, stress corrosion, high strength, crevice corrosion and cracking.
SA 240 S31803 Plate resists sulfide stress corrosion and chloride environments. It consists of around 40-50% ferrite in the annealed condition. Its high temperature strength are similar to stainless steel 430 in the range of 950~1150°C. However it shows rapid increase in the strength below 900°C. Cold workability is required as proof stress is high and elongation is low as compared to stainless steel 304.It is useful in application of oil & gas, pressure vessels, hydro power, pulp & paper, chemical tankers and structural components. It is not recommended to be used at temperatures above 300°C due to embrittlement.
ASTM A240 UNS S32205 Sheet has high strength of the ferritic grades while keeping the corrosion resistance of the austenitic grades. It has combination of good mechanical strength and ductility with moderate to good corrosion resistance in a variety of environments.
SA 240 UNS S32205 Plate is used as a practical solution to chloride-induced stress cracking, which is the achilles’ heel of stainless steel. It has magnetic property that can be used to easily differentiate them from common austenitic stainless grades.
As compared to 317L stainless steel ASTM A240 UNS S32205 Sheet and Plate has superior resistance to crevice corrosion and chloride pitting.It has an outstanding corrosion resistance to most concentrations of sulphuric acid and seawater and also resistant to sulphide stress corrosion cracking. It widely attributed to the high levels of chromium present as well as nitrogen and molybdenum.
Type | Description | USA FOB Price | Malaysia FOB Price | Europe FOB Price | Singapore FOB Price | Saudi Arabia (KSA) FOB Price | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | |||||||
Duplex Steel S31803 / S32205 Sheet / Plate / Coil | Size : 6mm x 1250 x 3500 | US $ | 3.45 | Malaysia Ringgit | 14.04 | Euro | 2.90 | Singapore Dollar | 4.62 | Saudi Riyal | 12.94 |
Duplex Steel S31803 Sheet, Plate & Coil Specifications |
||
Specifications | ASTM A240 / ASME SA240 | |
Thickness | 4mm-100mm | |
Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc | |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc | |
Surface | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
|
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) | |
Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
ASTM A240 UNS S31803 Plate
SA 240 S31803 Plate
ASTM A240 UNS S32205 Sheet
SA 240 UNS S32205 Plate
ASTM A240 UNS S32205 Sheet and Plate
SA 240 UNS S32205 Strips
Stocked Sizes |
|
---|---|
Size (in inches) |
Size (in mm) |
.125" |
3.18mm |
.134" |
3.40mm |
.156" |
3.96mm |
.187" |
4.75mm |
.250" |
6.35mm |
.312" |
7.92mm |
.375" |
9.53mm |
.500" |
12.7mm |
.600" |
15.9mm |
.750" |
19.1mm |
.875" |
22.2mm |
1" |
25.4mm |
1.125" |
28.6mm |
1.250" |
31.8mm |
1.500" |
38.1mm |
1.750" |
44.5mm |
2" |
50.8mm |
2.500" |
63.5mm |
3" |
76.2mm |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
S31803 / S32205 | 7.805 | 0.285 | 1420 – 1465 | 2588 – 2669 |
STANDARD | WERKSTOFF NR. | UNS |
Duplex 2205 | 1.4462 | S31803 / S32205 |
Thickness | Plate Weight per Unit Area | Density |
---|---|---|
3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Plate Surface finish | Thickness (mm) | Width (max mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
SA 240 S31803 Plate manufacturer