Duplex 2205 Round Bar

Duplex Round Bar

Duplex Stainless Steel Hex Bar and UNS S31803 Flat Bar manufacturer in India

Finding genuine Duplex 2205 Round Bar suppliers? Buy directly from the manufacturers and save cost

We Aesteiron Steels LLP are duplex round bar suppliers, which is being made under the guidance of our accomplished quality team by using improved techniques and latest technology.Duplex steel round baris available with us in various sizes, grades and specification.

Duplex 2205 round bar contain chromium of 22%, molybdenum of 3%, nickel of 5-6%, with high general, localized, and stress corrosion resistance properties in addition to excellent impact toughness and high strength.

2205 duplex stainless steel round bar provides pitting and crevice corrosion resistance which in almost all corrosive media it is superior to austenitic stainless steels 316L and 317L.

duplex 1.4462 roundbar also has low thermal expansion and high thermal conductivity as well as high corrosion and erosion fatigue properties than austenitic.

duplex hex bar should be annealed at 1900°F minimum, followed by rapid cooling, ideally by water quenching. And this treatment is valid for both solution annealing and stress relieving. Stress relief treatments at any lower temperature take the risk of detrimental intermetallic or precipitation of nonmetallic phases.

2205 duplex flat bar yield strength is about twice that of austenitic stainless steels and it allows a fabricator to save weight and makes it more cost competitive as compared to stainless steel 316L or 

duplex square bar can be machined with high-speed steel tooling at the same feeds and speeds as stainless steel 316L. It possesses good weldability. The motive of welding duplex steel is that the weld metal and heat-affected zone retains the corrosion resistance, toughness and strength of the base metal. It is not difficult to weld it, but it is necessary to design welding procedures sot that it lead to a favorable phase balance after welding and will avoid precipitation of detrimental intermetallic or nonmetallic phases.

Duplex 2205 UNS S32205 / S31803 Round Bar Specification

Cold & Hot Rolled Duplex 1.4462 Flat/ Threaded/ Hollow/ Black Bar manufactured as per ASTM A276/ A479

Standard Duplex 2205
UNS S31803 / S32205
Werkstoff Nr. 1.4462

Grade ASTM A276 UNS S31803 / ASTM A276 UNS S32205
Standard Specification ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Finish
  • Peel turned and burnished (PTB)
  • Peel turned (PT)
  • Rough machined (RM)
  • Hot Rolled Pickled
  • Sand Blasting Finished
  • Cold Drawn
  • Bright Polished
  • Polished
  • Hairline
  • Black
  • Rough Turned
  • NO.4 Finish
  • Matt Finish
  • BA Finish
Length 1 to 6 Meters, Custom Cut Lengths
Manufacturing Shapes Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
EN 10088-3 20-450 mm
EN 10272 20-160 mm
AD2000- W2/W10 -
ASTM A 479 20-450 mm
ASME SA 479 20-450 mm
NACE MR 0175 custom

ASTM A276 UNS S32205 Round Bar Stock Sizes

ASTM A276 UNS S32205 Round Bar Size Dimensions
Metric US Bar ASTM/ Canadian Japanese
Bar Sizes Diam. (mm) Bar Sizes Diam. (Inch) Bar Sizes Diam. (mm2) Bar Sizes Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50
Duplex 2205 UNS S32205 Bar
ASTM A276 UNS S31803 Rod
Duplex 2205 UNS S31803 Forged Bar
2205 Duplex Steel Forgings

2205 Duplex Rod Equivalent

GRADE WERKSTOFF NR./ DIN UNS ASTM ASME
Duplex Steel 2205 1.4462 S31803 / S32205 A276 SA 276

Duplex 2205 Bar Stock

Duplex 2205 UNS S31803 Square Bar Cold Drawn ASTM A276 UNS S31803 Bright Bar material
ASTM A276 S32205 Hex Bar Black Duplex S31803 A479 Cold Drawn Round Bar
Duplex 2205 UNS S32205 Round Bar Duplex 2205 UNS S32205 Flat Bar Annealed
Stainless Steel Duplex Grade 2205 Rectangular Bar Black 2205 Duplex Steel Bright Bar Hex
Duplex 2205 UNS S31803 Rounds Duplex 2205 UNS S31803 Threaded Bar
Duplex S32205 Flat Bar UNS S32205 Duplex F60 Flat Bar Polished
Duplex S32205 Hex Bar Cold Drawn ASTM A276 UNS S32205 F60 Polished Round Bar
2205 Duplex Steel Bright Bar 2205 Duplex Steel Square Rod
ASTM A276 UNS S31803 Bar ASTM A276 UNS S31803 Flat Bar stock
2205 Duplex Steel S31803 Rectangular Bar stock ASTM A276 S32205 Threaded Bar Stock
UNS S32205 F60 Duplex Rod Stainless Steel Duplex Grade 2205 Hollow Bar
ASTM A276 Type S31803 Round Bars UNS S32205 F60 Duplex Hexagonal Bar
ASTM A276 UNS S32205 F60 Rectangular Bar Duplex Steel 2205 Flat Bar Bright
Duplex 2205 UNS S32205 Square Bar Bright Duplex Steel UNS S31803 Bright Bar Cold Drawn
Duplex S31803 A479 Hex Bar ASTM A276 Type S31803 Triangular Bar
Duplex S31803 A479 Rectangular Bar Cold Drawn ASTM A276 Type S31803 Threaded Bar M16
2205 Duplex Steel S31803 Hex Bar Bright ASTM A276 S32205 Polished Bar
ASTM A276 UNS S32205 F60 Hex Bar Polished 2205 Duplex Steel S31803 Polished Flat Bar
ASTM A276 S32205 Rectangular Bar Annealed Duplex S31803 A479 Threaded Bar Black
UNS S32205 F60 Duplex Rectangular Bar Bright Stainless Steel Duplex Grade 2205 Bright Bar Hollow
ASTM A276 Duplex Steel S31803 Hex Bar Annealed Duplex S32205 Polished Square Bar
Duplex Steel 2205 Forged Bar ASTM A276 Duplex Steel S31803 Polished Hex Bar
UNS S32205 Duplex F60 Square Bar Duplex Steel 2205 Polished Bar Stock
Duplex Steel UNS S31803 Square Bar Black UNS S32205 Duplex F60 Black Bar
ASTM A276 UNS S31803 Square Bar Polished Duplex 2205 UNS S32205 Bright Bar Hot Rolled
2205 Duplex Steel Square Bar Annealed Duplex 2205 UNS S31803 Bright Bar Flat
ASTM A276 Type S31803 Rectangular Bar Polished UNS S32205 F60 Duplex Threaded Bar M12
ASTM A276 Duplex Steel S31803 Flat Bar Black Duplex Steel UNS S31803 Flat Bar Cold Drawn

ASTM A276 Duplex Alloy 2205 Bar Chemical Composition

Contact us for small piece or bulk Duplex Round Bar, available in bright and mill finish, All Sizes and Thickness at factory price ex Mumbai
Duplex 2205 C Mn Cr Fe N Si P S Mo Ni
ASTM A276 S31803 0.030 max 2.00 max 22.0 – 23.0 63.72 min 0.14 – 0.20 1.00 max 0.030 max 0.020 max 3.0 – 3.5 4.50 – 6.50
ASTM A276 S32205 0.030 max 2.00 max 21.0 – 23.0 63.54 min 0.8 – 0.20 1.00 max 0.030 max 0.020 max 2.5 – 3.5 4.50 – 6.50

ASME SA 276 Type S31803 Mechanical Properties

Density 7.8 g/cm3
Tensile Strength (PSI/MPa) Psi - 90000 , MPa - 620
Yield Strength (PSI/MPa) (0.2%Offset) Psi - 65000 , MPa - 450
Melting Range 1440 °C (2625 °F)
Elongation % 30 %

2205 Duplex Stainless Steel Round Bar Tolerances

According to EN 10278 - ISO 286-2

Different Manufacturing Types ISO Tolerance
Cold Drawn and Polished Duplex 2205 UNS S32205 Bar h8- h9- h10- h11
ASTM A276 UNS S31803 Cold Drawn and Ground Bar h8- h9- h10- h11
Duplex 2205 UNS S31803 Peeled and Polished Round Bar h11, h11-DIN 1013
2205 Duplex Steel Peeled and Ground Bar h9- h10- h11

ASTM A276 UNS S31803 Duplex Bar Price Per Kg

200mm 2205 duplex stainless steel round bar steel
FOB Price: US $350.00 - US $950.00/ Ton
SGS Test cold rolled duplex 2205 stainless steel square bar
FOB Price: US $1,200.00 - US $2,500.00/ Ton
ASTM A276 2205 s31803 duplex stainless steel round bar
FOB Price: US $2,200.00 - US $4,000.00/ Ton
Duplex stainless steel 2205 inox round bar / rod
FOB Price: US $1,799.00 - US $1,999.00/ Ton
S32750 2205 duplex stainless steel Round bar
FOB Price: US $18.00 - US $20.00/ Kilograms
2205 31803 stainless steel ss bright round bar
FOB Price: US $1,000.00 - US $3,000.00/ Ton
1.4462 F55 Duplex 2205 Stainless Steel Rod
FOB Price: US $2,800.00 - US $2,880.00/ Ton
1.4418/jis s45cb/ Duplex 2205 round bar
FOB Price: US $600.00 - US $650.00/ Ton
2205 S31803 Duplex steel round bar
FOB Price: US $1,300.00 - US $3,000.00/ Ton
2205 / UNS S31803 Duplex Stainless Steel Round Bar
FOB Price: US $100.00 - US $500.00/ Piece
Duplex steel ASTM SA276 S31803 round bar
FOB Price: US $14.00 - US $15.00/ Kilograms
Duplex Stainless Steel UNS S31803 S32205 F51 1.4462 Round Bar
FOB Price: US $1,200.00 - US $5,000.00/ Ton
Duplex S31803 S32205 2205 stainless steel round bar dia 3mm to 450mm
FOB Price: US $4,430.00 - US $4,500.00/ Ton
Duplex Stainless Steel UNS S31803 S32205 F51 1.4462 Round Bar
US $1,999.00 - US $2,999.00/ Tons

2205 duplex stainless steel round bar Manufacturer in India

Get free sample