
DIN 17100 Steel Plate
We Aesteiron Steels LLP are ST52-3N Steel plate supplier. It is available in various sizes and thickness as per the needs and requirements of our client with good delivery terms and the competitive price. It is been fabricated by using high quality raw material.
DIN 17100 Standard applies to steel sections steel bars, wire rod, flat products, strip, plate, wide flats, seamless and welded, square and rectangular hollow sections, forgings and semi-finished products in the general structural steels named which are delivered in the hot formed or normalized condition after production.
DIN 17100 Steel is used to build bridges, shipbuilding which requires high strength.
DIN 17100 ST 52.3 is a kind of carbon and low alloy steel. DIN17100 ST52-3 steel plate can be readily welded to other weldable steel. Dueto its low carbon equivalent, it provides good cold-forming properties. It is supplied in normalized or control-rolled condition. It is mainly for use in welded, riveted and screwed structural components. Its machinability is similar to that of mild steel.
DIN 17100 ST 37.2 material numbers is 1.0037 it is an unalloyed structural steel grade complies with DIN 17100 has been discarded since 2004. According to German standard it is divided into St37-2, USt37-2, RSt37-2 and St37-3. The new designation of material St 37 is S235, and St37-2 new designation is S235JR (1.0038) and the new standard is EN 10025-2: 2004.
After production for general structural purposes in steel industry DIN 17100 ST 44.2 can be delivered in hot rolled or normalized condition.
Grade : |
ST52-3(1.0570) |
Specification: |
Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm |
Standard: |
DIN17100 Technical delivery conditions for general structural steels |
Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
Classification: |
hot rolled or normalizing structural steels |
DIN 17100 Steel Plate
DIN 17100 cold rolled plate
DIN 17100 Plate
DIN 17100 ST 52.3 Sheet
DIN 17100 ST 37.2 Plate
DIN 17100 ST 44.2 Steel Plate
Thickness, C |
P |
S |
N |
|
≤16 |
0.22 |
0.050 |
0.050 |
|
>16 ≤30 |
0.22 |
|||
>30 ≤40 |
0.24 |
|||
>40 ≤63 |
0.24 |
|||
>63 ≤100 |
0.24 |
Temperature |
-20 |
-10 |
0 |
20 |
Notch impact test. Min. absorbed energy J |
27 |
|
27 |
|
Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 150 |
150 - 200 |
ReH - Minimum yield strength (MPa) |
355 |
345 |
335 |
325 |
315 |
|
|
Nominal thickness (mm) |
to 3 |
3 - 100 |
Rm -Tensile strength (MPa) |
510-680 |
490-630 |
Europe En10025(93) |
France NFA35-501 |
U.K. BS4360 |
Italy UNI7070 |
China GB |
Japan JIS3106 |
S355J0 |
E36-3 |
50C |
Fe 510C |
Q345C |
SS490B |
DIN 17100 ST 44.2 standard steel plates manufacturer