- +91 22 6777 6777
- info@aesteiron.com
Copper Sheet Product Information
Want to Purchase Copper Sheet? Click here to Check the Ready Stock
Copper Sheets
Copper Plates
Pure Copper Coil
Table of Contents
Copper Alloy Plate Sizes
Copper Sheet Temper
Pure Copper Sheet ASTM Standard
Cu Strips Surface Finish
Copper Shim Stock Thickness
Thin Copper Plate EN Standards
Perforated Cu Sheet Grades
Pure Copper Plate Types
Copper Alloy Strips Value Added Services
Copper Mesh Sheet Testing Requirements
C110 Copper Plate Marking
Hammered Copper Sheets Packaging
Perforated Copper Plate Common Trade Names
Certification of ASTM B370 Strips
B152 C110 Copper Plate Method of Cutting
Keep Stock of Below
Aesteiron Recent Export Orders
Exported Copper Sheet to Philippines
Recently Dispatched Copper Plate to Singapore
C10100 Copper Sheet
C10200 Copper Sheet
C10300 Copper Sheet
C10800 Copper Sheet
C11000 Copper Sheet
C12000 Copper Sheet
C12200 Copper Sheet
C14200 Copper Sheet
Copper Sheet Supplier in India are available in various Grades
| C10100 | |
|---|---|
| Oxygen-Free Sheet (OFE/OFHC) | Alloy 101 OFE OFHC Copper Sheet |
| C10100 Copper Sheet | OFE OFHC C101 Copper Sheet & Plate |
| C11000 | |
| ALLOY 110 Copper Sheet | ALLOY 110 Copper Plate |
| Alloy Name | Cu-ETP | Cu-DHP | Cu-TBC |
|---|---|---|---|
| Trade Name | Electrolytic Tough Pitch Copper | Deoxidized, High Residual Phosporus Copper | Tin Bearing Copper |
| Standard Conformance | |||
| ASTM | C11000 | C12200 | C14410 |
| IS | IS 191/ 14811/ 1897 | IS 191/ 14811/ 1897 | IS 3331 |
| EN 1652 | CW004A | CW024A | - |
| BS 2870 | C101 | C106 | - |
| JIS | C1100 | C1220 | - |
Copper Foil
C110 Copper Plate
Cu Coil
C10200 Copper Strip
4x8 Copper Sheet
Copper C10300 Shim Sheet
Cu C12200 Flat Sheet
C14200 Copper Clad Plate
C16200 Copper Hot-rolled Plate
| Temper Designation | Yield Strength, at 0.5% Extension Under Load, min ksi (MPa) | Tensile Strength, ksi (MPa) | Scale | Approximate Rockwell Hardness (For Information Only) | Standard Former |
|---|---|---|---|---|---|
| F | up to 65 | 30 (205) - 38 (260) | Superficial 30 T | up to 31 | 060 (soft) |
| H01 | 28 (190) | 34 (235) - 42 (290) | H01 | 60-84 | cold-rolled, high yield |
| H00 | 20 (135) | 32 (220) - 40 (275) | H00 | 54-82 | cold-rolled |
| H03 | 32 (220) | 41 (285) - 50 (345) | H03 | 82-91 | three-quarter hard |
| H02 | 30 (205) | 37 (255) - 46 (315) | H02 | 77-89 | half hard |
| H04 | 35 (240) | 43 (295) - 52 (360) | H04 | 86-93 | hard |
| Property | Value (Metric Units) | Units (Metric) | Value (English Units) | Units (English) |
|---|---|---|---|---|
| Atomic Number | 29 | |||
| Density | 8.92 | g/cm³ | 0.322 | lb/in³ |
| Atomic Weight | 63.54 | |||
| Modulus of Rigidity (Torsion) at: | 6.4 × 10³ | MPa | 44,000 | Ksi |
| (20°C, Annealed) | 17 × 10³ | 68°F | ||
| Boiling Point | 2595 | °C | 4703 | °F |
| Latent Heat of Fusion | 205 | J/g | 88 | Btu/lb |
| Electrical Resistivity (Volume) at: | 1.78 | μΩ·cm | 0.700 | μΩ·in |
| (20°C, Fully Cold Worked) | 68°F | |||
| Melting Point | 1083 | °C | 1981 | °F |
| Linear Coefficient of Thermal Expansion | 16.8 × 10⁻⁶ | cm/cm/°C | 9.33 × 10⁻⁶ | in/in/°F |
| (at 25°C to 100°C) | ||||
| Modulus of Elasticity (Tension) at: | MPa | 118,000 | Ksi | |
| (20°C, Annealed) | 68°F | |||
| Thermal Conductivity at: | 3.94 | W/cm·°C | 227 | Btu·ft/ft²·hr·°F |
| (20°C) | 68°F | |||
| Specific Heat (Thermal Capacity) at: | 0.386 | J/g·°C | 0.0921 | Btu/lb·°F |
| (20°C) | 68°F | |||
| Electrical Conductivity (Volume) at: | 58.0-58.9 | MS/m (m²·mm²) | 100-101.5 | %IACS |
| (20°C, Annealed) | 68°F | |||
| (at 100°C) | 0.393 | J/g·°C | 0.0939 | Btu/lb·°F |
| (100°C) | 3.85 | W/cm·°C | 223 | Btu·ft/ft²·hr·°F |
| Electrical Resistivity (Volume) at: | 1.7241-1.70 | μΩ·cm | 0.6788-0.669 | μΩ·in |
| (20°C, Annealed) | 68°F | |||
| Electrical Conductivity (Volume) at: | 56.3 | MS/m (m²·mm²) | 97.0 | %IACS |
| (20°C, Fully Cold Worked) | 68°F |
| HS Code | Product | Origin Country |
|---|---|---|
| 74091900 | COPPER CLAD Plates | China |
| 74099000 | COPPER SHEETS | United States |
| 74091900 | COPPER SHEET-COIL | Taiwan |
| Weight per Sq Ft | Thickness | Ozs | Gauge | Lbs/Sq Ft | Lbs/Sheet | Temper | Size |
|---|---|---|---|---|---|---|---|
| 12 | 27 | 750 | 22.500 | 0.162 | 24.000 | 36 * 96 | |
| 48 * 120 | |||||||
| 16 | 24 | 1000 | 36 * 96 | 0.216 | 142721 | 24.000 | |
| 36 * 120 | |||||||
| 16 | 24 | 1000 | 30.000 | 0.216 | 142713 | H | |
| 48 * 120 | |||||||
| 16 | 24 | 1000 | 48 * 96 | 0.216 | 142381 | 32.000 | |
| 48 * 120 | |||||||
| 16 | 24 | 1000 | 48 * 120 | 0.216 | H | 506399 | 40.000 |
| 48 * 120 | |||||||
| 20 | 22 | 1250 | 36 * 96 | 0.270 | 142763 | 30.000 | |
| 36 * 120 | |||||||
| 20 | 22 | 1250 | 37.500 | 0.270 | 142755 | H | |
| 24 | 21 | 1500 | 36 * 96 | 0.320 | H 1/8 | 142789 | 36.000 |
| 20 | 22 | 1250 | 50.000 | 0.270 | 492794 | H | |
| 32 | 19 | 2000 | 36 * 96 | 0.430 | 142810 | 48.000 | |
| 24 | 21 | 1500 | 60.000 | 0.320 | 421395 | ||
| 32 | 19 | 2000 | 80.000 | 0.430 | 142404 | H 1/8 | |
| 48 | 16 | 3000 | 36 * 120 | 0.647 | H | 142420 | 90.000 |
| 32 | 19 | 2000 | 36 * 120 | 0.430 | H | 431609 | 60.000 |
| 48 | 16 | 3000 | 120.000 | 0.647 | 142438 |
| Thickness (Inches) | WxL (Inches) | Thickness Tolerance | Pounds Per Square Foot |
|---|---|---|---|
| 0.0640 | 36 x 96 | (±.006) | 2.9583 |
| 20 Oz, 0.0270 | 36 x 96 | (±.004) | 1.2480 |
| 0.0647 | 36 x 120 | (±.006) | 2.9907 |
| 36 Oz, 0.0480 | 36 x 96 | (±.005) | 2.2188 |
| 0.0937 | 36 x 96 | (±.007) | 4.3312 |
| 0.0625 | 36 x 96 | (±.006) | 2.8890 |
| 0.1250 | 36 x 96 | (±.007) | 5.7780 |
| 0.0800 | 36 x 96 | (±.007) | 3.6979 |
| 0.2500 | 36 x 120 | (±.012) | 11.5560 |
| 0.1875 | 36 x 96 | (±.008) | 8.6670 |
| Ounce-Weight/ft² | Theoretical Thickness, A (in.) | Tolerances, Plus and Minus (in.) | Theoretical Thickness, A (mm) | Tolerances, Plus and Minus (mm) |
|---|---|---|---|---|
| 6 | 0.0081 | 0.001 | 0.206 | 0.026 |
| 10 | 0.0135 | 0.0011 | 0.343 | 0.028 |
| 8 | 0.0108 | 0.0011 | 0.274 | 0.028 |
| 16 | 0.0216 | 0.0012 | 0.549 | 0.031 |
| 12 | 0.0162 | 0.0012 | 0.411 | 0.030 |
| 24 | 0.0323 | 0.0015 | 0.820 | 0.038 |
| 20 | 0.0270 | 0.0012 | 0.686 | 0.031 |
| 48 | 0.0646 | 0.0025 | 1.64 | 0.06 |
| 32 | 0.0431 | 0.002 | 1.09 | 0.05 |
| TEMPER DESIGNATION | TEMPER NAME OR CONDITION |
|---|---|
| Annealed Conditions | |
| 010 | Cast & Annealed |
| 060 | Soft Annealed |
| 020 | Hot Forged & Annealed |
| 081 | 1/4 Hard |
| 061 | Annealed |
| 010 | 1/4 Hard |
| Cold Worked Tempers: | |
| H02 | 1/2 Hard |
| H01 | 1/4 Hard |
| H08 | Spring |
| H04 | Hard |
| Cold Worked & Stress Relieved Tempers: | |
| HR04 | H04 & Stress Relieved |
| HR01 | H01 & Stress Relieved |
| Precipitation Hardened Tempers: | |
| TFOO | TBOO & Age Hardened |
| TBOO | Solution Heat Treated |
| TM00/TM02/TM08 | Mill Hardened Tempers |
| TH02 | TBOO & Cold Worked & Aged |
| Manufactured Tempers: | |
| M04 | As Pressure Die Cast |
| M01 | As Sand Cast |
| M06 | As Investment Cast |
| Thinnest Copper Sheet | 0.7 mm. |
|---|
| Tension Leveling | |
|---|---|
| Thickness Capability | .004" to .045" |
| Maximum Width | 4" |
| Minimum Width | .250" |
| Coil Sizes | 3" to 16" ID; 36" max. OD |
| Tolerances | 1/4 coil set |
| Leveling & Cut-To-Length | |
|---|---|
| Alloys | Copper & Alloys, Stainless Steel, Aluminum, Zinc |
| Maximum Width | 60" |
| Thickness Capability | .010" to .125" |
| Length | 14" to 192" depending on width |
| Minimum Width | .250" |
| Length Tolerance | From ±.0625" to +.250"/-.000 |
| Plate Sawing | Precision | Standard |
|---|---|---|
| Thickness .125" to 3" | ±.010" | ±.032" |
| Fabrication Properties : | |
|---|---|
| Hot working temperature range | 750-950°C |
| Cold formability | Excellent |
| Hot formability | Good |
| Machinability rating | 20% (compared to free cutting brass = 100) |
| Cold reduction between anneals | 90% max |
| Stress relieving temperature range | 150-200°C |
| Annealing temperature range | 200-650°C |
| O60 | soft |
| H00 | cold-rolled |
| H01 | cold-rolled, high yield |
| H02 | half hard |
| H03 | three-quarter hard |
| H04 | hard |
| Ounce oz | Thickness | Gauge |
|---|---|---|
| 4 | 0.0050" | 36 |
| 12 | 0.0160" | 27 |
| 8 | 0.0108" | 31 |
| 20 | 0.0270" | 22 |
| 10 | 0.0135" | 28 |
| 32 | 0.0430" | 19 |
| 16 | 0.0216" | 24 |
| 36 | 0.0485" | 18 |
| 24 | 0.0320" | 21 |
| 56 | 0.0750" | 15 |
| 48 | 0.0647" | 16 |
| 72 | 0.0930" | 13 |
| 64 | 0.0863" | 14 |
| 96 | 0.1250" | 10 |
| 80 | 0.1080" | 12 |
| SWG | MM | INCH | SWG | MM | INCH |
|---|---|---|---|---|---|
| 22 | 0.71 | 0.028 | |||
| 1 | 7.62 | 0.300 | 30 | 0.32 | 0.012 |
| 10 | 3.25 | 0.128 | 39 | 0.13 | 0.005 |
| 2 | 7.01 | 0.276 | 31 | 0.30 | 0.012 |
| 7 | 4.47 | 0.176 | 36 | 0.19 | 0.008 |
| 3 | 6.40 | 0.252 | 32 | 0.27 | 0.011 |
| 8 | 4.06 | 0.160 | 37 | 0.17 | 0.007 |
| 4 | 5.89 | 0.232 | 33 | 0.25 | 0.010 |
| 9 | 3.66 | 0.144 | 38 | 0.15 | 0.006 |
| 5 | 5.39 | 0.212 | 34 | 0.23 | 0.009 |
| 11 | 2.95 | 0.116 | 40 | 0.12 | 0.005 |
| 6 | 4.88 | 0.192 | 35 | 0.21 | 0.008 |
| 14 | 2.03 | 0.080 | 43 | 0.09 | 0.004 |
| 12 | 2.64 | 0.104 | 41 | 0.11 | 0.004 |
| 15 | 1.83 | 0.072 | 44 | 0.08 | 0.003 |
| 13 | 2.34 | 0.092 | 42 | 0.10 | 0.004 |
| 17 | 1.42 | 0.056 | 46 | 0.06 | 0.002 |
| 16 | 1.63 | 0.064 | 45 | 0.07 | 0.003 |
| 19 | 1.02 | 0.040 | 48 | 0.04 | 0.002 |
| 18 | 1.22 | 0.048 | 47 | 0.05 | 0.002 |
| 21 | 0.81 | 0.032 | 50 | 0.03 | 0.001 |
| 20 | 0.91 | 0.036 | 49 | 0.03 | 0.001 |
Copper Sheet Manufacturer in India offers Best Quality Sizes
| Thickness | Length x Width (mm) | ||
|---|---|---|---|
| 2000 x 1000 | 1219 x 610 | 1200 x 600 | |
| 1.2 mm | 21.360 | 7.938 | 7.690 |
| 0.7 mm | 12.460 | 4.630 | 4.486 |
| 1.0 mm | 17.800 | 6.615 | 6.408 |
| 0.9 mm | 16.020 | 5.953 | 5.767 |
| 1.6 mm | 28.480 | 10.584 | 10.253 |
| 1.5 mm | 26.700 | 9.922 | 9.612 |
| 2 ins | - | 336.027 | 325.526 |
| 2.5 mm | 44.500 | 16.537 | 16.020 |
| 2.0 mm | 35.600 | 13.229 | 12.816 |
| 3/16 ins | - | 31.502 | 30.518 |
| 3.0 mm | 53.400 | 19.844 | 19.224 |
| 5/16 ins | - | 52.504 | 50.864 |
| 1/4 ins | - | 42.003 | 40.691 |
| 1/2 ins | - | 84.007 | 81.382 |
| 3/8 ins | - | 63.005 | 61.036 |
| 3/4 ins | - | 126.010 | 122.072 |
| 5/8 ins | - | 105.008 | 101.727 |
| 1 1/4 ins | - | 210.017 | 203.454 |
| 1 ins | - | 168.013 | 162.763 |
| 1 3/4 ins | - | 294.023 | 284.836 |
| 1 1/2 ins | - | 252.020 | 244.145 |
Why Aesteiron?
Tools & Downloads
Facts
Copper Sheet has density upto 8.92 g/cm³.
They are available in Cut to size and are used in various Applications
