
KEYASTM A519 102611111
In comparison to grade 1020, the ASTM A519 1026 Steel Chromoly Tubing is normally those tubes where the OD is larger than 2 inches and wall thicknesses for these A519 gr 1026 Seamless Steel Tubing is generally heavier than 156".
The ASTM A519 Grade 1026 tube is usually manufactured by hot working steel. The hot worked steel manufactured under this specification could either be carbon steel or this process could be used to make the ASTM A519 1026 Chrome Alloy Steel Hf Smls Tubing. If necessary, the Chrome Moly Steel ASTM A519 1026 Boiler Tubing could be subsequently cold finished by hot working the tubular product. Hot working the Alloy Steel ASTM A519 1026 Square Tubing in order to produce the desired dimensions, shape as well as certain properties.
The specified ASTM A519 Grade 1026 tubes, are generally furnished in the following shapes i.e. rectangular, round or square. If required, At Aesteiron, we manufacture these ASTM A519 Grade 1026 Mechanical Tubing furnished in special sections, according to the need of our clients or if required by the application for which it is to be used for. Heat analysis is usually performed on the ASTM A519 Grade 1026 Steel Tubing in order to determine the percentages of the elements specified in the material used to make these tubes. Although If secondary melting processes are used in the melting of A519 gr 1026 Seamless Tubing, the heat analysis could be obtained either from one re-melted ingot or the product of one re-melted ingot of every single primary melt. The ASTM A519 1026 Hot Finished Tubing has to be coated with a film of oil before shaping to retard rust when specified
KEYASTM A519 102611111
KEYChrome Moly Steel ASTM A519 1026222
KEYASTM A519 Grade 10263333
KEYAlloy Steel ASTM A519 1026
KEYASTM A519 1026 Chrome Alloy Steel55
KEYA519 gr 10266666
Standard |
ASTM A519 / ASME SA 519 |
ASTM A519 | This standard covers seamless hot-finished and cold-finished mechanical tubing |
Size Range | 12 3/4(323.8mm) |
Outer Diameter (OD) | 6.25-1800mm |
Pipe Schedule | 10 – XXS / Thk |
Shape | round, square, rectangular, hex and special shape. |
Length | Single / Double random length or as customer’s actual request |
Grade | SAE 1026 / AISI 1026 / GRADE 1026. |
Mill test certificates | EN10204.3 |
Terms of sale |
|
A519 1026 Chrome Alloy Steel Reheater Tubing | ASTM A519 1026 Straight Tubing |
A519 gr 1026 Instrument Tubing | Chrome Moly Steel A519 1026 U Bend Tubing |
Large Diameter Seamless Alloy Steel A519 1026 Tubing | Seamless ASTM A519 1026 Hydraulic Tubing |
ASME SA519 1026 Steel Round Tubing | A519 1026 Steel Seamless Boiler Tubing |
A519 1026 Seamless Tubing | Seamless Black 1026 Chrome Alloy Steel CDW Tube |
Chrome Moly Steel ASTM A519 1026 Welded Tubing | A519 gr 1026 Cold Drawn Tubing |
A519 Grade 1026 Hollow Tubing | A519 Dom 1026 Tubing |
Epoxy Coated 1026 A519 Steel Tubing | SA519 1026 Condenser Tubing |
Chrome Moly Steel A519 1026 Fabricated Tube | Thin Wall Chrome Moly Steel 1026 Cold Drawn Seamless Tubing |
Alloy Steel A519 1026 Boiler Tubing | 1026 A519 Steel finned tubing |
1026 A519 Steel High Pressure Tubing | Alloy Steel A519 1026 Water Tube Boiler |
A519 1026 Square Tubing | A519 1026 Chrome Alloy Steel Superheater Tubing |
Chrome Moly Steel ASTM A519 1026 Rectangular Tubing | A519 gr 1026 Coiled Tubing |
A519 Grade 1026 Welded Rectangular | A519 1026 Steel Dom Tubing |
Grade | C | Mn | P≤ | S≤ |
1026 | 0.22-0.28 | 0.60-0.90 | 0.040 | 0.050 |
Properties | Metric | Imperial |
Tensile strength | 490 MPa | 71100 psi |
Yield strength | 415 MPa | 60200 psi |
Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
Shear modulus (typical for steel) | 80.0 GPa | 11600 ksi |
Hardness, Brinell | 143 | 143 |
Hardness, Knoop (converted from Brinell hardness) | 163 | 163 |
Hardness, Rockwell B (converted from Brinell hardness) | 78 | 78 |
Hardness, Vickers (converted from Brinell hardness) | 149 | 149 |
Elastic modulus | 190-210 GPa | 27557-30458 ksi |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (In 50 mm) | 15.00% | 15.00% |
Reduction of area | 40.00% | 40.00% |
Machinability (based on AISI 1212 steel as 100 machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.) |
75 | 75 |
OD | Wall Thickness | Length | |
Cold Drawn | 3/4 to 15 Inch | 1/8 to 1 1/2 Inch | 12000 mm max |
Hot Rolled | 2 to 30 Inch | 1/8 to 8 Inch | 12000 mm max |
OD Size Range in |
Thermal Treatment after Final Cold Work Producing Size |
||||||||
Wall Thickness as Percent of OD |
None, or not exceeding 1100°F. Nominal Temperature |
Heated Above 1100°F. Nominal Temperature Without Accelerated Cooling |
|||||||
OD, in |
ID, in |
OD, in |
ID, in |
||||||
Over |
Under |
Over |
Under |
Over |
Under |
Over |
Under |
||
Up to 0.499 |
All |
0.004 |
0.000 |
— |
— |
0.005 |
0.002 |
— |
— |
0.500-1.699 |
All |
0.005 |
0.000 |
0.000 |
0.005 |
0.007 |
0.002 |
0.002 |
0.007 |
1.700-2.099 |
All |
0.006 |
0.000 |
0.000 |
0.006 |
0.006 |
0.005 |
0.005 |
0.006 |
2.100-2.499 |
All |
0.007 |
0.000 |
0.000 |
0.007 |
0.008 |
0.005 |
0.005 |
0.008 |
2.500-2.899 |
All |
0.008 |
0.000 |
0.000 |
0.008 |
0.009 |
0.005 |
0.005 |
0.009 |
2.900-3.299 |
All |
0.009 |
0.000 |
0.000 |
0.009 |
0.011 |
0.005 |
0.005 |
0.011 |
3.300-3.699 |
All |
0.010 |
0.000 |
0.000 |
0.010 |
0.013 |
0.005 |
0.005 |
0.013 |
3.700-4.099 |
All |
0.011 |
0.000 |
0.000 |
0.011 |
0.013 |
0.007 |
0.010 |
0.010 |
4.100-4.499 |
All |
0.012 |
0.000 |
0.000 |
0.012 |
0.014 |
0.007 |
0.011 |
0.011 |
4.500-4.899 |
All |
0.013 |
0.000 |
0.000 |
0.013 |
0.016 |
0.007 |
0.012 |
0.012 |
4.900-5.299 |
All |
0.014 |
0.000 |
0.000 |
0.014 |
0.018 |
0.007 |
0.013 |
0.013 |
5.300-5.549 |
All |
0.015 |
0.000 |
0.000 |
0.015 |
0.020 |
0.007 |
0.014 |
0.014 |
5.500-5.999 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.010 |
0.010 |
0.010 |
0.010 |
0.018 |
0.018 |
0.018 |
0.018 |
0.009 |
0.009 |
0.009 |
0.009 |
0.016 |
0.016 |
0.016 |
0.016 |
||
0.018 |
0.000 |
0.009 |
0.009 |
0.017 |
0.015 |
0.016 |
0.016 |
||
6.000-6.499 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.013 |
0.013 |
0.013 |
0.013 |
0.023 |
0.023 |
0.023 |
0.023 |
0.010 |
0.010 |
0.010 |
0.010 |
0.018 |
0.018 |
0.018 |
0.018 |
||
0.020 |
0.000 |
0.010 |
0.010 |
0.020 |
0.015 |
0.018 |
0.018 |
||
6.500-6.999 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.015 |
0.015 |
0.015 |
0.015 |
0.027 |
0.027 |
0.027 |
0.027 |
0.012 |
0.012 |
0.012 |
0.012 |
0.021 |
0.021 |
0.021 |
0.021 |
||
0.023 |
0.000 |
0.012 |
0.012 |
0.026 |
0.015 |
0.021 |
0.021 |
||
7.000-7.499 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.018 |
0.018 |
0.018 |
0.018 |
0.032 |
0.032 |
0.032 |
0.032 |
0.013 |
0.013 |
0.013 |
0.013 |
0.023 |
0.023 |
0.023 |
0.023 |
||
0.026 |
0.000 |
0.013 |
0.013 |
0.031 |
0.015 |
0.023 |
0.023 |
||
7.500-7.999 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.020 |
0.020 |
0.020 |
0.020 |
0.035 |
0.035 |
0.035 |
0.035 |
0.015 |
0.015 |
0.015 |
0.015 |
0.026 |
0.026 |
0.026 |
0.026 |
||
0.029 |
0.000 |
0.015 |
0.015 |
0.036 |
0.015 |
0.026 |
0.026 |
||
8.000-8.499 |
Under 6 6 to 7-1/2 over 7 1¼2 |
0.023 |
0.023 |
0.023 |
0.023 |
0.041 |
0.041 |
0.041 |
0.041 |
0.016 |
0.016 |
0.016 |
0.016 |
0.028 |
0.028 |
0.028 |
0.028 |
||
0.031 |
0.000 |
0.015 |
0.016 |
0.033 |
0.022 |
0.028 |
0.028 |
||
8.500-8.999 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.025 |
0.025 |
0.025 |
0.025 |
0.044 |
0.044 |
0.044 |
0.044 |
0.017 |
0.017 |
0.017 |
0.017 |
0.030 |
0.030 |
0.030 |
0.030 |
||
0.034 |
0.0000 |
0.015 |
0.019 |
0.038 |
0.022 |
0.030 |
0.030 |
||
9.000-9.499 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.028 |
0.028 |
0.028 |
0.028 |
0.045 |
0.045 |
0.045 |
0.045 |
0.019 |
0.019 |
0.019 |
0.019 |
0.033 |
0.033 |
0.033 |
0.033 |
||
0.037 |
0.000 |
0.015 |
0.022 |
0.043 |
0.022 |
0.033 |
0.033 |
||
9.500-9.999 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.030 |
0.030 |
0.030 |
0.030 |
0.045 |
0.045 |
0.053 |
0.053 |
0.020 |
0.020 |
0.020 |
0.020 |
0.035 |
0.035 |
0.035 |
0.035 |
||
0.040 |
0.000 |
0.015 |
0.025 |
0.048 |
0.022 |
0.035 |
0.035 |
||
10.000-10.999 |
Under 6 6 to 7-1/2 over 7-1/2 |
0.034 |
0.034 |
0.034 |
0.034 |
0.045 |
0.045 |
0.060 |
0.060 |
0.022 |
0.022 |
0.022 |
0.022 |
0.039 |
0.039 |
0.039 |
0.039 |
||
0.044 |
0.000 |
0.015 |
0.029 |
0.055 |
0.022 |
0.039 |
0.039 |
||
11.000-12.000 |
Under 6 6 to 7- 1/2 over 7-1/2 |
0.035 |
0.035 |
0.035 |
0.035 |
0.050 |
0.050 |
0.065 |
0.065 |
0.025 |
0.025 |
0.025 |
0.025 |
0.045 |
0.045 |
0.045 |
0.045 |
||
0.045 |
0.0000 |
0.015 |
0.035 |
0.060 |
0.022 |
0.045 |
0.045 |
OD (mm) | Wall Thickness - WT (mm) | |||||||||||||
2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 | 6 | 6.5-7 | 7.5-8 | 8.5-9 | 9.5-10 | 11 | 12 | |
Φ25-Φ28 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||||
Φ32 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||||
Φ34-Φ36 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||||
Φ38 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||||
Φ40 | ☑ | ☑ | ☑ | ☑ | ☑ | |||||||||
Φ42 | ☑ | ☑ | ☑ | ☑ | ☑ | |||||||||
Φ45 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||||
Φ48-Φ60 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | |||||||
Φ63.5 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | |||||||
Φ68-Φ73 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||||
Φ76 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ80 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ83 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ89 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ95 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ102 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ108 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||
Φ114 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | |||||
Φ121 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | |||||
Φ127 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | |||||
Φ133 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | |||||
Φ140 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||
Φ146 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||
Φ152 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||
Φ159 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ||||||
Φ168 | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ | ☑ |
Pipe Type | Pipe Sizes | Tolerances | |
---|---|---|---|
Cold drawn | OD | ≤48.3mm | ±0.40mm |
WT | ≥60.3mm | ±1%mm |
Cold Drawn Maximum % Over and Under Nominal |
Wall Thickness % of OD |
|
ID Up To 1.499 Inches |
ID 1.500 Inches and Over |
|
10 |
7.5 |
25 and Under |
12.5 |
10 |
Over 2 |
AISI 1026 Carbon Steel (UNS G10260) Tubing