ASTM A420 Grade WPL6 Buttweld Pipe Fittings

ASTM A420 WPL6 Fittings are widely utilized in pressure piping and pressure vessel service at low-temperatures.According to ASME Boiler and Pressure Vessel Code, ASTM A420 WPL6 Material is not allowed to use in the construction of power boiler. astm a420 wpl6 buttweld pipe fittings is a weldable pipe fitting that allows flow direction to change, to branch off, reduce pipe size or attach additional equipment. It is manufactured in accordance of ANSI / ASME B16.9. LTCS A420 WPL6 Weld Fittings is compatible with ASTM A333 Grade 6 Pipe and ASTM A350 LF2 Class 1 Flange.It has excellent drawing, high ductility, forming, and spinning properties, which is further typically non – magnetic and becomes slightly magnetic when cold worked. It is largely used in industries such as shipbuilding, offshore, water system, oil field, etc. SA 420 WPL6 Elbow impact tested at -50°F. It is a key part in a piping system for to change the fluid flow direction. It is used to make the pipe turn to a certain direction of 45 degree or 90 degree and to connect two pipes with same or different nominal diameters. Low Temperature Carbon Steel ASTM A420 WPL6 Elbow has resistance to pitting, general corrosion, sulphuric, phosphoric, nitric acids, and crevice corrosion in chemicals containing chlorides. A420 WPL6 Pipe Fittings is standard specification for piping fittings of wrought carbon steel and alloy steel for low-temperature service. It is specially used in low temperature conditions. It has excellent drawing, high ductility, forming, and spinning properties, which is further essentially non – magnetic and becomes slightly magnetic when cold worked.