- +91 22 6777 6777
- info@aesteiron.com
1/2″ – 36″ NPS, large OD on request
Every schedule, ex-stock – ready to cut
ASTM A333 / ASME SA333 Grade 6 – UNS K03006
Same spec buyers trust from Jindal, MSL & ISMT
SCH 10, 20, 30, 40, STD, 80/XS, 160, XXS
Heavy wall and large diameter on demand
Impact tested down to −50°F (−46°C)
NACE MR0175 / ISO 15156 sour service option
Seamless, ERW, EFW, LSAW & SSAW
Hot-finished or cold-finished, normalized
Low Temperature Carbon Steel (LTCS)
Fine-grain practice for −50°F (−46°C) toughness
NACE MR0175 Ready
Sour-service pipeline compliance on request
−50°F Impact Tested
Charpy V-notch on every certified heat
1/2″–24″ Sizes
SCH 10 to XXS wall, ex-stock
Dual Code Certified
ASTM A333 & ASME SA333 Gr 6, every heat
Mill-Direct Pricing
Stockholder rates, zero broker markup
Inspection Ready
SGS, Bureau Veritas, TUV, Lloyd’s, DNV
📌 Table of Contents
When someone is searching for ASTM A333 Grade 6 Pipe, the real question is almost always the same: which supplier already has the right size and schedule ready to ship. At Aesteiron Steels LLP, SA 333 Gr 6 Pipe is held in stock across the entire NPS range, meaning a confirmed order can move directly to dispatch instead of waiting on a new production run.
This material is also known under several interchangeable names – Carbon Steel A333 Gr.6 Pipe, LTCS A333 Gr 6, or ASME SA-333 Grade 6 – and is a fine-grain, fully-killed carbon steel commonly specified wherever piping must remain reliable down to −50°F (−46°C) without upgrading to a costlier nickel-alloy material. It is widely used in cryogenic transfer systems, LNG facilities, gas transmission networks, and refinery piping operating in cold climates.
Shipments dispatched from our stockyard in Mumbai to buyers across the Middle East, Africa, and the Americas are backed by dual ASTM/ASME certification, Charpy V-notch impact test reports, and an EN 10204 mill test certificate – giving EPC contractors and MRO procurement teams ready-to-use documentation without the delay of a freshly cast heat.
A quick summary of ASTM A333 Grade 6 Pipe specs – standard, size, length, and finish.
A trusted source for impact-tested pipe built for cold-climate and cryogenic-adjacent duty.
ASTM A333 Grade 6 Pipe Exporter in India includes a detailed weight chart with every export order for accurate freight planning.
| NPS | OD (inch) | Weight (lb/ft) |
|---|---|---|
| 5″ | 5.563 | 10.80 |
| 1″ | 1.315 | 1.68 |
| 2½″ | 2.875 | 3.53 |
| 3/4″ | 1.05 | 1.13 |
| 4″ | 4.5 | 5.62 |
| 1½″ | 1.90 | 2.72 |
| 6″ | 6.625 | 7.59 |
| 2″ | 2.375 | 2.64 |
| 3½″ | 4.0 | 4.98 |
| 1¼″ | 1.66 | 2.27 |
| 1/2″ | 0.84 | 0.85 |
| 3″ | 3.50 | 4.34 |
Schedule availability across common Grade 6 pipe sizes, ex-stock in Mumbai.
| NPS | SCH 40 (mm) | SCH 80 / XS (mm) | SCH 160 (mm) | XXS (mm) |
|---|---|---|---|---|
| 16″ | 9.5 | 12.7 | 40.5 | – |
| 3/4″ | 2.9 | 3.91 | 5.56 | 7.82 |
| 10″ | 9.3 | 12.7 | 28.6 | 25.4 |
| 1 1/2″ | 3.7 | 5.08 | 7.14 | 10.2 |
| 28″ | 9.5 | 12.7 | – | – |
| 4″ | 6 | 8.56 | 13.5 | 17.1 |
| 1″ | 3.4 | 4.55 | 6.35 | 9.09 |
| 22″ | 9.5 | 12.7 | 54 | – |
| 2 1/2″ | 5.2 | 7.01 | 9.53 | 14 |
| 6″ | 7.1 | 10.97 | 18.3 | 22 |
| 34″ | 9.5 | 12.7 | – | – |
| 1/2″ | 2.8 | 3.73 | 4.78 | 7.47 |
| 12″ | 9.5 | 12.7 | 33.3 | 25.4 |
| 3 1/2″ | 5.7 | 8.08 | – | – |
| 20″ | 9.5 | 12.7 | 50 | – |
| 5″ | 6.6 | 9.53 | 15.9 | 19.1 |
| 8″ | 8.2 | 12.7 | 23 | 22.2 |
| 1 1/4″ | 3.6 | 4.85 | 6.35 | 9.7 |
| 26″ | 9.5 | 12.7 | – | – |
| 3″ | 5.5 | 7.62 | 11.1 | 15.2 |
| 18″ | 9.5 | 12.7 | 45.2 | – |
| 2″ | 3.9 | 5.54 | 9.74 | 11.1 |
| 14″ | 9.5 | 12.7 | 35.7 | – |
| 32″ | 9.5 | 12.7 | – | – |
| 24″ | 9.5 | 12.7 | 59.5 | – |
| 30″ | 9.5 | 12.7 | – | – |
| 36″ | 9.5 | 12.7 | – | – |
Aesteiron maintains ready stock of SA 333 Gr 6 Seamless & ERW Pipe across India, spanning the full 1/2″–24″ range, with cutting-to-length service and fast quote turnaround.
Every construction type of low temperature carbon steel pipe we supply, shown here at a glance.
Recognized ASTM A333 Grade 6 Pipe Exporter in India shipping pipes qualified for low-temperature and cryogenic applications worldwide.
Cold-climate pipelines & gathering systems
Transfer lines and terminal piping
Cold-service process units
Cross-country carbon steel pipelines
Topside & subsea low-temp piping
Ammonia & process cooling lines
Established ASTM A333 Grade 6 Pipe Supplier in India offering pipes produced through seamless and ERW manufacturing methods.
Hot-Finished Seamless
Cold-Drawn / Cold-Rolled Seamless
Electric Resistance Welded (ERW)
Electric Fusion Welded (EFW)
Longitudinal SAW (LSAW)
Spiral SAW (SSAW)
Normalized (Heat-Treated)
Quenched & Tempered
Choose the end finish and length format that fits your fabrication or installation needs.
Available in 6m single random, 12m double random, or precise cut-to-length on request.
NPT or BSP threading offered on smaller bore sizes for direct fit-up connections.
Delivered with a standard mill finish, ready for straightforward field welding.
Machined to a 30° bevel angle for quick, weld-ready site joints.
Dependable ASTM A333 Grade 6 Pipe Stockist in Mumbai backed by verified composition certificates.
| Element | C | Mn | P (max) | S (max) | Si | Ni (max) | Cr (max) | Mo (max) | V (max) |
|---|---|---|---|---|---|---|---|---|---|
| ASTM A333 Gr 6 | 0.30 max | 0.29–1.06 | 0.025 | 0.025 | 0.10 min | 0.40 | 0.40 | 0.15 | 0.03 |
Every heat is tested against these minimum tensile, yield, and elongation values before certification.
Reliable ASTM A333 Grade 6 Pipe Supplier in India offering pipes with consistent physical properties suited for sub-zero service conditions.
Approx. 52 W/m·K at room temp.
Approx. 1425–1540°C
7.85 g/cm³
Approx. 200 GPa (29,000 ksi)
ASTM A333 Grade 6 Pipe Stockist in Mumbai checks every batch against the mill tolerance chart for OD, wall thickness, and length.
Offering surface coating options like FBE and epoxy for added corrosion protection.
FBE Coating
3LPE Coating
Hot-Dip Galvanized
Varnished / Oiled
Epoxy Coated
Coal Tar Enamel
Polyurethane (PU) Coating
Zinc-Rich Primer
Comparable low temperature carbon steel grades stocked across our global network.
| Grade | Base Metal | Min Temp | Typical Use |
|---|---|---|---|
| Grade 1 | Carbon-Manganese-Silicon | −45°F | General low-temp service |
| Grade 3 | 3.5% Nickel | −150°F | Cryogenic & gas processing |
| Grade 4 | 3.5% Nickel (double normalized) | −150°F | Extra toughness cryogenic duty |
| Grade 6 | Carbon Steel, fine-grain | −50°F | Pipelines, cold-climate process |
| Grade 7 | 9% Nickel | −320°F | LNG storage & transfer lines |
| Grade 8 | 9% Nickel | −320°F | LNG applications |
| Grade 9 | 2.25% Nickel | −100°F | Intermediate cryogenic duty |
| Grade 10 | Carbon Steel (higher strength) | −55°F | Structural low-temp piping |
| Grade 11 | Carbon-Manganese | −50°F | General low-temp pipelines |
These are the mills Aesteiron stocks direct for, as a Distributor and Stockholder, not a broker.
Jindal SAW
ISMT
Maharashtra Seamless
Tenaris
Vallourec
ArcelorMittal
Nippon Steel
TPCO
ASTM A333 Grade 6 Pipe Stockist in Mumbai ensures pipes pass strict testing methods, including Charpy impact testing.
Hydrostatic Test
Eddy Current Test – ASTM E273
Charpy V-Notch Impact Test – ASTM A370 / E23
Spectro / Chemical Composition Test
Ultrasonic Test (UT) – ASTM E213
Flattening Test – ASTM A370
Tensile Test – ASTM A370
Visual & Dimensional Inspection
Service capability depends on wall thickness, temperature, and material grade per applicable codes.
Pipes with controlled heat treatment for required low-temperature toughness.
≈ 900–930°C
Air cool, grain refine
Optional, per drawing
Charpy V-notch, −50°F
UT / RT verification
Documentation issued with every consignment of ASTM A333 Grade 6 Pipe for traceability and compliance verification.
Both are carbon steel pipes, but they are specified for very different service conditions.
| Parameter | ASTM A333 Grade 6 Seamless Pipe | ASTM A106 Grade B Welded Pipe |
|---|---|---|
| Service Intent | Low temperature / cryogenic-adjacent | High temperature process piping |
| Impact Testing | Mandatory, −50°F (−46°C) | Not mandatory |
| Min Tensile Strength | 415 MPa (60 ksi) | 415 MPa (60 ksi) |
| Min Yield Strength | 240 MPa (35 ksi) | 240 MPa (35 ksi) |
| Grain Practice | Fine-grain, normalized | Standard practice |
| Typical Use | LNG, cryogenic transfer, cold pipelines | Refinery & process steam lines |
ASTM A333 Grade 6 Pipe Supplier in India shares a transparent price chart with every enquiry.
Send us these details and receive a firm quote within 2 hours.
NPS, OD, wall thickness or schedule
Seamless, ERW, EFW, LSAW or SSAW
Plain end, bevelled or threaded
MTC 3.1 / 3.2, NACE, third-party inspection
Tonnage or meter length, discharge port
Share your size, schedule and destination port – our team replies with pricing and stock availability within 2 hours.
Aesteiron maintains and distributes Vallourec, Tenaris, Jindal SAW, ISMT, Salzgitter Mannesmann and TPCO origin ASTM A333 Grade 6 Pipe across regional stock points in the Middle East, Africa and the Americas, as one of India's active A333 Gr 6 Pipe Stocking Distributors ensuring consistent stock availability.
Stockholder for Jindal SAW & ISMT A333 Gr 6 Pipe Stockholder
Stockist of Jindal SAW & MSL A333 Gr 6 Pipe Stockist
Distributor for TPCO & Sumitomo A333 Gr 6 Pipe Distributor
Supplier of Vallourec & ISMT A333 Gr 6 Pipe Supplier
Authorised Stockist of Jindal SAW & ISMT A333 Gr 6 Pipe Stockist
Supplier of TPCO & MSL Low Temp A333 Gr 6 Pipe Supplier
Stocking Distributor for Tenaris & Vallourec A333 Gr 6 Pipe Distributor
Supplier of Vallourec & ISMT Seamless A333 Gr 6 Pipe Supplier
Stockist of Vallourec & Sumitomo A333 Gr 6 Pipe Stockist
Stockholder for Tenaris & Salzgitter Mannesmann A333 Gr 6 Pipe Stockholder
Distributor for Tenaris & Vallourec A333 Gr 6 Pipe Distributor
Stocking Distributor for Salzgitter Mannesmann A333 Gr 6 Pipe Distributor
Stockholder for ISMT & Jindal SAW A333 Gr 6 Pipe Stockholder
Supplier of Vallourec & TPCO Seamless A333 Gr 6 Pipe Supplier
Stocking Distributor for ISMT & Jindal SAW A333 Gr 6 Pipe Distributor
Stockist of Vallourec & Tenaris A333 Gr 6 Pipe Stockist
6″ SCH 40, seamless, Charpy tested at −46°C, EN 10204 3.1 MTC.
Pipeline EPC Contractor, Algeria
HASSI MESSAOUD, ALGERIA10″ SCH 80, bevelled ends, NACE MR0175, SGS inspected.
LNG Terminal EPC, UAE
JEBEL ALI, DUBAI, UAE4″ SCH 40, seamless, PMI & hydro-tested, EN 10204 3.2 MTC.
Cold Storage Facility, Morocco
CASABLANCA, MOROCCO8″ SCH 80, seamless, Charpy tested at −50°C, third-party witnessed.
Petrochemical Complex, Texas
HOUSTON, TEXAS, USA12″ SCH 40, seamless, 100% UT tested, EN 10204 3.1 MTC.
Gas Processing EPC, Saudi Arabia
JUBAIL, SAUDI ARABIA3″ SCH 80, seamless, hydro & PMI tested, EN 10204 3.2 MTC.
Fertilizer Plant, Nigeria
PORT HARCOURT, NIGERIA2″ SCH 160, seamless, NACE MR0175 compliant, BV inspected.
Offshore Oil & Gas Operator, Qatar
DOHA, QATAR14″ SCH 40, seamless, eddy current tested, EN 10204 3.1 MTC.
Refinery Expansion Project, Egypt
CAIRO, EGYPT16″ SCH 30, seamless, full traceability, TÜV inspected.
Industrial Gas Supplier, South Carolina
CHARLESTON, SOUTH CAROLINA, USACarbon steel pipe for low-temperature and cryogenic piping systems.
Qualified down to −50°F (−46°C) with Charpy impact testing.
Grade 6 is impact tested for low temperature; A106 Gr B is for high-temperature service and isn't impact tested.
EN 10204 3.1 as standard; 3.2 and NACE MR0175 available on request.
Yes, compliant with NACE MR0175 / ISO 15156 on request.
Why Aesteiron?
Tools & Downloads
Conclusion
ASTM A333 Grade 6 Pipe, dual-certified to ASME SA333 under UNS K03006, is the trusted choice for pipelines and process piping wherever service temperature drops as low as −50°F (−46°C). Buyers across the Middle East, Africa and the Americas rely on Aesteiron Steels LLP as one of the most responsive ASTM A333 Grade 6 Pipe suppliers for quick, ex-stock quotes.
Quick form – quote in 2 hours.
