ASTM A234 WPB Pipe Fittings

ASTM A234 WPB Pipe Fittings

ASTM A234 WPB Pipe Fittings Highlights

  • Seamless Fittings Size: 1/2" to 24"
  • Tensile Strength: 415 MPa
  • Bending Radius: 1D, 10D, 2D, 8D, 3D, 6D, 5D
  • Standards: ASME B16.28, MSS-SP-43, ANSI B16.9

Want to Buy MTC Certified ASTM A234 WPB Pipe Fittings? Click here to get a Quick Quote



SA234 Grade WPB Tee and A234 WPB Elbow Manufacturer in India

ASTM A234 WPB Pipe Fitting

ASTM A234 WPB Pipe Fitting

A234 WPB Welded 90 Degree Elbow

A234 WPB Welded 90 Degree Elbow

ASME SA234 WPB Carbon Steel Seamless End Cap

ASME SA234 WPB Carbon Steel Seamless End Cap

Table Of Content


SA234 Grade WPB Elbow

ASTM A234 WPB Specification
Sizes

ASTM A234 WPB Pipe Fittings Sizes

  • A234 WPBSeamless Fittings :1/2" to 24"
  • SA234 WPB Welded Fittings : 24 to 96″
American Standard

ASME SA A234 Grade WPB Elbow Dimensional Standard

  • ASME SA234
  • ASTM A234


Ends

A234 WPB Welded Fittings Ends

  • Bevelled
  • Plain Bevel
  • Compound Bevel



Schedule

ASTM A234 Grade WPB Seamless Fittings Schedule

  • STD
  • SCH 160
  • SCH 60
  • XH
  • SCH 10
  • SCH 80
  • SCH 40
  • XXH
  • SCH 20
American Standard

SA234 WPB Pipe Caps American Standard

  • MSS-SP 119
  • MSS-SP-95
  • MSS-SP-83
  • ANSI / ASME B16.9
  • MSS-SP-43
  • ANSI/ ASME B16.25
  • ANSI/ ASME B16.28

Coating

A234 WPB Concentric Reducer Coating

  • PE coating
  • Anti rust light oiling
  • FBE coated A234 gr WPB material
  • Hot-dip galvanizing ASME A234 WPB elbow
  • Back painting
  • Varnished
Meet the Requirements

Carbon Steel ASTM A234 WPB Tee Meet the Requirements

  • Sour service
  • NACE MR0103
  • NACE MR0175
  • ISO 15156
  • NACE TM-0284
  • MTC EN 10204-3.1
Angle

CS A234 WPB Sch 40 Elbow Bend Angle

  • 60 Deg
  • 45 Deg
  • 22.5 Deg
  • 30 Deg
  • 90 Deg



Bend Radius

ASME SA234 WPB Carbon Steel Pipe Bend Radius

  • 8D
  • 3D
  • 6D
  • 4D
  • 10D
  • 5D

GOST Standard

A234 WPB B16.9 Reducing Tee GOST Standard (Russia)

  • GOST 17375
  • GOST 17375 (induction elbow)
  • GOST 17379
  • GOST 17378
  • GOST 17376






Testings

ASTM A234 End Cap Testings

  • 100% Radiography Tested
  • Ultrasonic test
  • Magnetic Particle Examination
  • Positive Material Identification (PMI)
  • HIC tested







DIN standards

ASME SA A234 Grade WPB Cross DIN standards (Germany)

  • DIN 2615-1 (Tee)
  • DIN 2616-1 (Eccentric Reducer)
  • DIN 2615-2 (Tee)
  • DIN 2605-2 (Elbow)
  • DIN 2617 (Caps)
  • DIN 2605-1 (Elbow)
  • DIN 2616-2 (Concentric Reducer)
Types

Carbon Steel Sch 40 A234 Pipe Fittings Types

  • Pipe Bend
  • Stub End
  • Tee
  • Cross
  • Reducer
  • Elbow
  • Cap
Packaging

ASTM A234 WPB Tee Packaging

  • Wooden Cases
  • Carton Box
  • Wooden Pallet
  • Custom as per buyer choice




Marking

A234 WPB Carbon Steel Fittings Marking

  • Sizes
  • Manufacturer logo / name
  • Material grade
  • Manufacturing date



Click here for EX Stock Sizes

Aesteiron's Most Recent Export Requests

Canada
Supplied ASTM A234 WPB Pipe Fittings to Canada

Supplied ASTM A234 WPB Pipe Fittings to Canada

France
Recently Dispatched A234 WPB Carbon Steel Fittings to France

Recently Dispatched A234 WPB Carbon Steel Fittings to France


ASTM A234 Gr WPB Fittings in form of Elbow, Reducer, Cap, Bend, Cross and Tee

Leaading ASTM A234 WPB Pipe Fittings Manufacturer in India are available in various Forms and Shapes

Carbon Steel ASTM A234 WPB Tee

Carbon Steel ASTM A234 WPB Tee

ASME SA A234 Grade WPB Elbow

ASME SA A234 Grade WPB Elbow

SA234 WPB Cross

SA234 WPB Cross

ANSI B16.9 Carbon WPB Concentric Reducer

ANSI B16.9 Carbon WPB Concentric Reducer

CS ASTM A234 Stub End

CS ASTM A234 Stub End

ASTM A234 Grade WPB Cap

ASTM A234 Grade WPB Cap

A234 WPB Pipe Bend

A234 WPB Pipe Bend

ASTM A234 Eccentric Reducer

ASTM A234 Eccentric Reducer

ASTM A234 WPB Sch 40 Elbow Dimensions and Weight Chart

Dimensions Chart
NPS O.D. 180 Degree Return 45 Degree Elbow 90 Degree Elbow
(inch) Long Radius Elbow Long Radius Elbow Long Radius Elbow Short Radius
(millimeter) (inch) Center to Center
(inch)		 Back to face
(inch)		 Center to Face
(inch)		 Radius
(inch)		 Center to Face
(inch)		 Center to Face
(inch)
1 33.4 1.315 3 2 3/16 7/8 1 1/2 1
1/2 21.3 0.840 2 1 7/8 5/8 1 1/2 –
1 1/4 42.2 1.660 3 3/4 2 3/4 1 1 7/8 1 1/4
3/4 26.7 1.050 2 1/4 1 11/16 7/16 1 1/8 –
2 60.3 2.375 6 4 3/16 1 3/8 4 3 2
1 1/2 48.3 1.900 4 1/2 3 1/4 1 1/8 3 2 1/4 1 1/2
3 88.9 3.500 9 6 1/4 2 6 4 1/2 3
2 1/2 73.0 2.875 7 1/2 5 3/16 1 3/4 5 3 3/4 2 1/2
4 114.3 4.500 12 8 1/4 2 1/2 8 6 4
3 1/2 101.6 4.000 10 1/2 7 1/4 2 1/4 7 5 1/4 3 1/2
6 168.3 6.625 18 12 5/16 3 3/4 12 9 6
5 141.3 5.563 15 10 5/16 3 1/8 10 7 1/2 5
10 273.1 10.750 30 20 3/8 6 1/4 15 15 10
8 219.1 8.625 24 16 5/16 5 12 12 8
12 323.9 12.750 36 24 3/8 7 1/2 18 18 12
Weight Chart
Product range and weights (kg)
DN Schedule 80S Schedule 40S Schedule 10S
900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee 900 Elbow 450 Elbow Equal tee
8 0.04 0.03 0.07 0.03 0.02 0.06 0.02 0.01 0.03
20 0.11 0.05 0.20 0.08 0.04 0.17 0.07 0.03 0.13
15 0.10 0.05 0.14 0.08 0.04 0.10 0.06 0.03 0.09
10 0.06 0.04 0.09 0.03 0.02 0.03 0.03 0.02 0.05
32 0.40 0.23 0.68 0.26 0.17 0.59 0.23 0.11 0.49
25 0.22 0.14 0.38 0.15 0.11 0.29 0.14 0.08 0.28
50 0.91 0.59 1.59 0.70 0.4 1.28 0.50 0.25 0.85
40 0.51 0.29 1.02 0.40 0.23 0.86 0.30 0.17 0.68
80 2.97 1.50 4.45 2.20 1.08 3.31 1.25 0.63 1.77
65 1.81 0.99 3.13 1.40 0.77 2.19 0.85 0.48 1.41
100 6.18 2.81 7.71 4.47 2.09 5.27 2.10 1.08 3.46
90 4.00 2.00 5.44 2.83 1.42 4.08 1.70 0.75 2.67
200 33.11 16.56 28.12 21.54 10.77 20.91 10.20 5.33 15.65
150 16.32 8.16 13.61 10.89 5.44 10.99 5.45 2.72 8.07
300 79.38 39.69 83.91 59.42 29.71 62.14 25.80 13.62 39.46
250 51.71 25.86 49.90 38.56 19.27 35.38 18.15 9.75 26.46
SA234 WPB Material for Oil and Gas Industries
SA234 WPB Material for Oil and Gas Industries

Manufacturer of ASTM A234 WPB Elbow in various Configurations and Radius
  • A234 Wpb long radius elbow
  • ASTM A234 short radius elbow
  • SA234 WPB 1d elbow
  • 5d elbow
  • 1.5d elbow
  • 3d elbow
  • 8d elbow
  • 2d elbow
A234 WPB Concentric Reducer Dimensions
Nominal Pipe Size Weight in Pounds Length
2 x 1 0.81 3
20 x 16 121 20
18 x 10 83.7 15
24 x 16 150 20
24 x 14 147 20
3 x 2 2 3.5
42 x 36 443 24
6 x 4 7.4 5.5
12 x 8 30.5 8
48 x 30 525 28
12 x 6 29.5 8
6 x 2 6.5 5.5
8 x 6 12.3 6
16 x 6 67.4 14
18 x 12 84.8 15
48 x 42 525 28
8 x 5 11.5 6
3 x 1 1.7 3.5
4 x 1 2.8 4
5 x 2 4.7 5
8 x 3 9.8 6
10 x 5 19.5 7
10 x 4 18.4 7
12 x 10 32.4 8
14 x 8 60 13
16 x 8 69.4 14
14 x 6 59.2 13
16 x 10 71.1 14
20 x 18 123 20
24 x 10 141 20
30 x 24 315 24
36 x 30 379 24
ASTM A234 WPB Reducer Temperature Range

ASTM A234 WPB Pipe Fittings Supplier in India exhibits Temperature Range from 20°F to 800°F

Temperature Range 20°F (-29°C) - 800°F (427°C)
SA234 Grade WPB Tee Weight Chart
ASME A234 WPB Tee DN Sch 40 A234 Gr WPB Tee NPS
600 345 24
15 0.2 1/2
400 120 16
25 0.3 1
300 69 12
20 0.2 3/4
250 41.3 10
32 0.6 1 1/4
450 170 18
50 1.5 2
500 240 20
40 0.9 1 1/2
65 2.7 2 1/2
90 4.6 3 1/2
350 96 14
80 3.8 3
100 6.5 4
125 9.7 5
150 14 6
200 24.5 8
ASTM A234 WPB Elbow Heat Treatment
Heat Treatment 1150°F[620°C] to 1800°F[980°C]
A234 WPB Weld Fittings Tolerance
A234 WPB Pipe fittings NPS Angularity tolerances
Size Off Angle Q Off Plane P
10 to 12 0.09 0.19
½ to 4 0.03 0.06
14 to 16 0.09 0.25
5 to 8 0.06 0.12
26 to 30 0.19 0.38
18 to 24 0.12 0.38
44 to 48 0.18 0.75
32 to 42 0.19 0.5
ASTM A234 WPB Pipe Fittings Equivalent Standard
Pipe Flanges Valves Fittings Bolts & Nuts
A106 Gr A A105 A216 Gr WCB A234 Gr WPA

A194 Gr 2H

A193 Gr B7
A106 Gr C A216 Gr WCB A234 Gr WPC
A106 Gr B A216 Gr WCB A234 Gr WPB
SA234 WPB Chemical Composition
Grades Composition, %
P C S Mn Cr Si Mo
WP1 0.045 0.28 max 0.045 0.30-0.90 … 0.10-0.50 0.44-0.65
WPB 0.050 0.30 max 0.058 0.29-1.06 0.40 max 0.10 min 0.15 max
WP12 CL1, WP12 CL2 0.045 0.05-0.20 0.045 0.30-0.80 0.80-1.25 0.60 max 0.44-0.65
WPC 0.050 0.35 max 0.058 0.29-1.06 0.40 max 0.10 min 0.15 max
WP11 CL3, WP11 CL2 0.040 0.05-0.20 0.040 0.30-0.80 1.00-1.50 0.50-1.00 0.44-0.65
WP11 CL1, 0.030 0.05-0.15 0.030 0.30-0.60 1.00-1.50 0.50-1.00 0.44-0.65
WP5 CL3, WP5 CL1 0.040 0.15 max 0.030 0.30-0.60 4.0-6.0 0.50 max 0.44-0.65
WP22 CL3, WP22 CL1 0.040 0.05-0.15 0.040 0.30-0.60 1.90-2.60 0.50 max 0.87-1.13
WPR 0.045 0.20 max 0.050 0.40-1.06 … … …
WP9 CL3, WP9 CL1 0.030 0.15 max 0.030 0.30-0.60 8.0-10.0 1.00 max 0.90-1.10
WP911 0.020 0.09-0.13 0.010 0.30-0.60 8.5-9.5 0.10-0.50 0.90-1.10
WP91 0.020 0.08-0.12 0.010 0.30-0.60 8.0-9.5 0.20-0.50 0.85-1.05
A234 WPB End Cap Allowable Stress
Temp. S
40 118
100
65
150
125
250
200
325
300
375 105
350 117
425 75.3
400 88.9
475 45.5
450 62.7
525 21.9
500 31.6
550 12.7
ASTM A234 WPB Seamless Pipe Fittings Mechanical Properties
Properties WPB WP11CL1 WP11CL2,WPC WP11CL3
Tensile Strength, min, ksi[MPa] 60-85 60-85 70-95 75-100
Yield Strength, min, ksi[MPa] 32 30 40 45
[240] [205] [275] [310]
0.2% offset or 0.5% extension under load [415-585] [415-585] [485-655] [520-690]
A234 Eccentric Reducer Tensile Requirements
WP91
WPB,
WPC, WP11, WP22
Transverse Longitundinal Transverse Longitundinal
Standard
min % in 4 D		 13 20 14 22
Rectangular speicimen for wall thickness less than 5/16 inch,
min % in 2 in 1/2 inch 		B B
wall thickness 5/16inch, min % in 2 in. 20 A 30
Carbon Steel ASTM A234 WPB Reducing Tee Hardness
Hardness
ASTM A234 197 HB Max 
Installation and Maintenance of ASME B16.28 Carbon Steel WPB Buttweld Fittings
Installation and Maintenance of ASME B16.28 Carbon Steel WPB Buttweld Fittings

ASTM A234 WPB Pipe Fittings Full Form
  • W : Weldable/ Wrought
  • P : Number Of Alloy Material
  • B :Yield Of Material
ASTM A234 WPB BW Fittings Pressure Rating
Pressure Temperature ratings for A234 WPB Pipe Fittings (psig)
Temperature Ratings Pressure Class
150 300
1 1/4 - 2 inch. 1/4 - 1 inch. 2 1/2 - 3 inch.
(oC) (oF)
-29 to 66 -20 to 150 300 1500 2000 1000
121 250 225 1200 1575 825
93 200 265 1350 1785 910
177 350 150 900 1150 650
149 300 185 1050 1360 735
232 450 - 600 725 475
204 400 - 750 935 560
288 550 - 300 300 300
260 500 - 450 510 385
A234 WPB END Cap Advantages
A234 WPB END Cap Advantages

ASTM A234 WPB SCH 80 Elbow Size Range
Nom. Pipe Size 90° Elbows 180° Return Long Radius Elbow 45° Elbows
Long Radius Short Radius 3R STD XS Long Radius 3R
STD XS SCH. 160 STD XS STD XS STD XS STD XS
5 15 22 32 9.6 14 29 43 30 44 7.5 10.7 15 22
3½ 6.75 8.35 – 4.5 6 13 18 13 16.75 3.5 4.5 7 9
2 1.6 2.2 3.25 1 1.5 3 4 3.23 4.4 0.81 1.19 1.5 2.1
4 9 13.5 18 6.25 8.5 18 25 18.5 25 4.5 6.1 9 13
3 5 6.5 8.5 3 4.25 10 13 10.25 13 2.63 3.5 5 7
6 24.5 35 57 18 23 45 70 50 70 12 17.5 23 35
10 88 107 260 58 70 159 218 117 215 43 53 80 109
8 50 71 120 34 47.5 90 140 95 142 23 35 45 70
22 394 520 – – – 735 980 787 1040 197 260 368 490
18 260 340 – 167 219 495 660 510 690 126 167 248 330
24 460 600 – 298 392 875 1170 890 1200 238 300 438 585
20 320 420 – 210 275 610 810 640 830 160 206 305 405
12 125 160 450 80 104 233 310 230 320 62 84 117 155
26 550 729 – – – 1030 1370 – – 275 365 515 685
14 160 205 572 105 140 298 400 325 400 80 100 149 200
A234 WPB Bend Wall Thickness
Wall Thickness WPB
in. [mm] Transverse Longitudinal
5⁄16 7.94 20 30
7⁄32 5.56 … 25.5
9⁄32 7.14 19 28.5
5⁄32 3.97 … 22.5
3⁄16 4.76 … 24
3⁄32 2.38 … 19.5
1⁄8 3.17 … 21
1⁄16 1.59 … 18
ASTM A234 WPB Pipe Fittings HS Code
Product Country / Origin HS CODE
ASTM A234 CARBON STEEL SEAMLESS BUTT - WELD Fitting Italy 73079990
ASTM A234 GR WPB 45 DEG LR ELBOW China 73079990

Buttweld Pipe Fittings

Other Pipe Fittings

Other Products

Why Aesteiron?

  • Distributor of USA, Japan and European Mills for Seamless Pipes and Steel Plates
  • Only Indian Company who has Weekly 3 Shipment to Saudi Arabia, Netherlands and USA
  • Vast experience as an Exporter of Industrial Long and Flat Products in India
  • Keep Ex-Stock of Nickel Alloys Make Special Metals, USA
  • Supply Europe, USA, Japan and Korea Origin Material
  • Local Distributor in Houston (USA)
  • 350+ Clients in Atlanta, California, Wisconsin, Texas, Kansas, Indiana, Florida
  • Get Price, availability, and shipping information Via WhatsApp and Email in Maximum 2 Hrs
  • DFARS compliant Pipe, Fittings and Sheets for oil and gas companies
  • Weekly Delivery in Tanzania, Sharjah, Dubai, Qatar and Cape Town
  • Special Price for Steel Suppliers, Wholesalers, Importer, Stockholder, Traders and Stockist in USA
  • Known for Best quality of Steel Fittings, Flanges and Pipes
  • Offer MTC 3.1/3.2 and Third Party Inspection at Lowest Price
  • Specialized in supplying Large Diameter Steel Pipes with wear-resistant coating
Visit Factory

Visit Factory

Project Reference

Project Refrence

Tools & Downloads

Facts

The Heat Treatment of ASTM A234 WPB Pipe Fittings varies from 1150°F to 1800°F.

They are widely used in Oil and Gas Industries.

Request a Quote

whatsapp chat