Aluminum Round Bar supplier in India

aluminum-round-bar.html

6061 Aluminum Flat and Square Bar Stock in Mumbai

Manufacturer and supplier of 10mm Aluminium Rod and 3 inch Aluminum Flat Bar as per ASTM B211 specificaton, check price list ex Mumbai

Aesteiron Steels LLP is aluminium rod manufacturers in India. It is available in various sizes and specifications to cater to the diverse demands of esteemed customers. 
Aluminium Round Bar is physically, chemically and mechanically is similar to steel, brass, copper, zinc, lead or titanium. It can be cast, melted, formed and machined in a same way like this metals. In fact it often the same equipment and fabrication methods are used as for steel.

We are also aluminium solid bar supplier & aluminium flat bar supplier. For providing the best quality of the material we conduct several quality tests on our products such as Mechanical Testing, Positive Material Identification Testing, Micro and Macro Test, Inter-granular Corrosion (IGC) Test, etc.
aluminium square barnaturally produce a protective thin oxide coating which keeps it from making further contact with the environment. It is particularly useful for applications where it is exposed to corroding agents, as in vehicles and kitchen cabinets.
aluminium t bar are less corrosion-resistant than pure aluminum, except for marine magnesium-aluminum alloys. Different types of surface treatment such as anodizing, painting or lacquering can further improve its property. It is perfect for framing, store fixtures, displays, glass/mirror projects and more.

aluminium angle baris used to provide stability to structures. It is frequently installed along with the edges of beams and other platforms that may not have enough capacity to carry the expected load.

astm-b211aluminum bar is a standard specification for aluminum alloy rolled or cold finished bar.
aluminium 6061 baris a precipitation-hardened aluminium alloy which contains magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability and it is very commonly extruded.

aluminium 6061 rod has good machinability in harder T 4 and T6 tempers. It can be machined in an annealed temper. It is ductile and has a low melting point and density.

aluminium 6061 flat barhas excellent weldability. The thinner sections can be welded by using gas tungsten arc welding technique. While the heavier sections can be welded using the gas metal arc welding technique.

7075-t6 aluminum round barhas an excellent mechanical properties and exhibits good ductility, high strength, toughness, and good resistance to fatigue.

Aluminium Solid Bar Price List

Aluminum Round Bar Specification

Standard Specification ASTM B221 / ASTM SB221
Dimensions Chart EN, DIN, JIS, ASTM, BS, ASME, AISI
Size Chart
5 To 500 mm
Diameter 0.1 to 100 mm
Length 100 To 3000 mm Long & Above
Surface Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Types of Aluminum Tee Bar

Aluminium Round Bar
Aluminium Square Bar
Aluminium T Bar
Aluminium Angle Bar
Aluminium 6061 Bar
Aluminium 6061 Flat Bar

Grades of 7075 t6 aluminum bar stock

  • Alloy: 19000, 19500, 19501, 19600, 19700, 6082 T6 , 6061 T6 , 2014 T6, 6063 T6, 7075 T6, 5052 .

Standard Aluminum Round Bar Sizess

  • 5 milimeter X 12'' Long
  • 6 milimeter X 12'' Long
  • 10 milimeter X 12'' Long
  • 12 milimeter X 12'' Long
  • 15 milimeter X 12'' Long
  • 19 milimeter X 12'' Long
  • 25 milimeter X 12'' Long
  • 140 milimeter
  • 150 milimeter TO 203 milimeter
  • 50 milimeter X 12'' Long
  • 30 milimeter X 12'' Long
  • 38 milimeter X 12'' Long
  • 60 milimeter X 12'' Long
  • 100 milimeter X 12'' Long
  • 110 milimeter
  • 120 milimeter
  • 130 milimeter
  • 210milimeter TO 400milimeter

Aluminium Angle Bar Chemical Compatibility Chart

Grade Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
Aluminium 0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance 0.15 max

Mechanical Behaviour of Aluminium T Bar

Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA KSI MPA %
T6, T651 45 310 21 145 25 65

Astm B211 Equivalent Standard

Stockist of 7075 Aluminium Tee Bar and Angle Bars in India, check astm b211 alloy 6061-t6 equivalent standard, stock, sizes and weight per foot

Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS

Aluminum Round Bar Weight Per Foot

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20milimeter 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22milimeter 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24milimeter 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5milimeter 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7 0.091 0.298 30milimeter 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8 0.120 0.398 32 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951
12mm 0.271 0.889 40mm 3.009 9.872
1/2" 0.303 0.994 1-5/8" 3.200 10.449
13mm 0.318 1.043 1-3/4" 3.712 12.179
14mm 0.368 1.207 45mm 3.807 12.555
9/16" 0.383 1.256 1-7/8" 4.260 13.977
15mm 0.424 1.391 48mm 4.330 14.205
5/8" 0.473 1.551 50mm 4.698 15.414
16mm 0.481 1.578 2" 4.848 15.906
17mm 0.543 1.791 2-1/8" 5.475 17.963
11/16" 0.573 1.880 2-1/4" 6.135 20.128
18mm 0.610 2.001 60mm 6.768 22.205
3/4" 0.682 2.237 2-3/8" 6.838 22.435
2-1/2" 7.576 24.856
2-5/8" 8.354 27.409
2-3/4" 9.169 30.083

Aluminium Square Bar Sizes

  CG HR RT
Aluminium Ann- Round

* CG - Centerless Ground
HR RT - Hot Rolled Rough Turned
3/16
1/4
5/16
3/8
1/2
5/8
3/4
13/16
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
  CG HR RT
Aluminium Ann- Round

* CG - Centerless Ground
HR RT - Hot Rolled Rough Turned
3/16
1/4
5/16
3/8
1/2
5/8
3/4
13/16
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2