Aluminium Sheet

Aluminium Sheet

standard
  • Standard Width : 914 mm, 1220 mm
  • Thickness: 0.38 to 1.22 mm
  • Standards: ASTM B632 , ASTM B209
  • Certifcate:MTC EN 10204 3.1
  • Grades : 1100, 8011, 5052,6082 ,3003, 6061,     ,7075 , 1200, 3105
Aluminium Sheet

Aluminium Plate Manufacturer in India, Check ASTM B632 Plate Sizes

ASTM B632 Plate Sizes
Aluminium Sheet Thickness
  • 0.80mm - 10mm
Width
  • 800mm - 1600 mm
Lenght
  • Alu sheet : 800mm - 6000mm
  • Aluminium coils : 10.000mm - xx.xxx mm
Aluminium Tread Plate
  • Number of Tread : 1,2,3,4,5
  • Thickness of Tread 0.50mm - 1.5mm
  • Al Tread Plate ASTM : ASTM B632

Aluminium Sheets

Aluminium Sheets

Aluminium Alloy Plate

Aluminium Alloy Plate

Aluminium Strip

Aluminium Strip

Table Of Content


Cold Rolled Aluminium Strips and Coils As Per IS 736 Specification

Aluminium Sheet Specification
Aluminium Sheet Sizes

Aluminium Sheet Sizes

  • Length:3000 to 12000 mm
  • Width:900 to 2400 mm
  • Thickness: 0.02 to 4 mm
Aluminium Alloy Coil Sizes

Aluminium Alloy Coil Sizes

  • Length:2000 – 6000mm
  • Thickness: 2.5-10.0 mm
  • Width:610-2000 mm
Aluminium Plate Sizes

Aluminium Plate Sizes

  • Length:3000 to 12000 mm
  • Width:900 to 2400 mm
  • Thickness: 4.5 to 100 mm
Aluminum Alloy Clad Plate Markings

Aluminum Alloy Clad Plate Markings

  • ASTM/ ASME standard
  • Sizes
  • Manufacturing date
  • Origin of material
  • Manufacturer logo / name
  • Material grade

Aluminum Tread Plate Standards

Aluminum Tread Plate Standards

  • ASTM B548
  • AMS 4003
  • ASTM B947
  • AMS 4001
  • ASTM B209
  • ASTM B632 / B632M
  • ASME SB209



1100 Aluminum Sheet Indian Standard

1100 Aluminum Sheet Indian Standard

  • ISO 6361-4:2014
  • IS 1254 : 1991
  • IS 737 : 2008
  • IS 8147 (1976)
  • IS 2676 (1981)
  • IS: 7882 – 1975




Aluminium Alloy Sheet Testing Requirements

Aluminium Alloy Sheet Testing Requirements

  • Visual inspection test
  • Chemical test
  • Non destructive test pmi test
  • Destructive test
  • Third party inspection test
  • Flaring Test
  • Nabl approved lab test
  • Mechanical test

Aluminium Roofing Sheet Value Added Services

Aluminium Roofing Sheet Value Added Services

  • Slitting
  • welding
  • sawing
  • shearing
  • Blanking
  • cutting to length
  • Polishing
  • Bending
  • mechanical processing
  • edge preparation

Aluminium Sheet Types

Aluminium Sheet Types

  • Strip
  • Sheet
  • Plate
  • Flat Sheet
  • Foil Sheet
  • Clad Plate
  • Coil
  • Shim Stock
  • Mesh
  • Chequered Plate
  • Foils
  • Perforated Sheet
  • Rolls

Aluminium Panel Sheet Certification

Aluminium Panel Sheet Certification

  • Certificate of Origin legalized
  • Third Party Inspection Report
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • EN 10204/3.1B,

Diamond Plate Sheet Hardness

Diamond Plate Sheet Hardness

  • Half Hard
  • Spring Hard
  • Hard
  • Soft
  • Quarter Hard











Thin Aluminum Strip Cutting Method

Thin Aluminum Strip Cutting Method

  • Waterjet Cutting
  • Oxy-propane Flame Cutting
  • Plasma Cutting
  • Laser Cut Aluminum Sheet









4047 Aluminum Flat Sheet Delivery Condition

4047 Aluminum Flat Sheet Delivery Condition

  • Cold Rolled
  • Annealed
  • Quenched
  • Hot Rolled





Aluminum Coil Welding Methods

Aluminum Coil Welding Methods

  • PLASMA
  • GTAW (TIG)
  • SAW
  • GMAW (MIG/MAG)
  • SMAW (MMA)





Alu Sheet Surface Finish

Alu Sheet Surface Finish

  • Mill
  • embossed
  • sand blast
  • hair line
  • brush
  • etching
  • Bright finish
  • Customer specific finish
  • polished

Aesteiron's Most Recent Export Requests

Australia
Supplied Aluminium Sheet to Australia

Supplied Aluminium Sheet to Australia

South Africa
Recently Exported Aluminium Plate to South Africa

Recently Exported Aluminium Plate to South Africa

4047 Aluminum Coil Imperial Sizes

PED Approved Aluminium Coil Manufacturer in India, Provide Different Sizes as Per Customers Need at Reasonable Price

Standard Sizes Thickness (Inches)
Length x Width 3/16 5/16 1/4 1/2 5/8 3/8 7/8 3/4 1 1/4 1
2500 x 1250 40.332 67.221 53.777 107.553 134.441 80.665 188.218 161.330 268.883 215.106
4000 x 2000 - - 137.668 275.336 344.170 206.502 - 413.004 688.340 550.672
3000 x 1500 - 96.798 77.438 154.877 193.596 116.157 271.034 232.315 387.191 309.753
Benefits of Using Aluminum Plate For Roofing
  • Light Weight and Durable
  • Formability
  • Non-Magnetic
  • Eco-Friendly
  • Cost-Effective

Supplier of Alu Sheet in 1mm, 2mm, 3mm and 5mm Size at Low Cost, Check Thickness Chart

Aluminium Sheet Thickness Chart in MM

ISO Certified Aluminium Sheet Supplier in India, Offers Various Thickness as Per Customer Requirements

Aluminium Sheet 1010 & 6082
Aluminium flat sheet
2500 mm x 1250 mm		 Aluminium flat sheet
2000 mm x 1000 mm
6mm 6mm
20mm 20mm
1mm 1mm
4mm 4mm
2mm 2mm
1.2mm 1.2mm
12mm 12mm
2.5mm 2.5mm
10mm 10mm
1.5mm 1.5mm
25mm 25mm
3mm 3mm
5mm 5mm
16mm 16mm
8mm 8mm
Most Popular Sizes of Alu Sheet

Looking For Aluminium Sheet Supplier in India?, Aesteiron Provide Al Sheet in Various Sizes For Automotive and Aerospace industries

  • 1/4 in aluminum plate
  • aluminium sheet 8x4
  • 1/8 inch aluminum sheet
  • 1mm aluminium sheet
  • diamond plate aluminum 4x8
  • 5mm aluminium sheet
  • 1/16 inch aluminum sheet
  • 2mm aluminium sheet
Aluminium Sheet For Roof
Aluminium Sheet For Roof
Aluminum Plate Gauge Chart

High Quality Aluminium Plate Supplier in India, Offers Various Gauge Like 12, 14, 18 and 22 Gauge aluminum Sheet at Best Price

Gauge No. Inches mm
7 .1443 3.665
10 .1019 2.588
8 .1285 3.264
11 .09074 2.305
9 .1144 2.906
14 .06408 1.628
12 .08081 2.053
18 .04030 1.024
16 .05082 1.291
22 gauge aluminum sheet .02535 .644
20 .03196 .812
26 .01594 .405
24 .02010 .511
30 .01003 .255
28 .01264 .321
Exporter of Perforated Aluminum Sheet in Brushed, Polished and Mill Finish as Per ASTM B632, 12% less on volumes, Check Sizes
Perforated Aluminum Sheet Size Chart

Cut to Size Aluminum Sheet Supplier in India offers various Finishes and Thickness as per the need of Customer

99.5 Perforated Aluminium Sheet
(2.5m x 1.25m)		 Round Hole (R) & Square Hole (C)
Hole Size Pitch Pattern Sheet Size Thickness % Open Area
R5.00 mm T8.00 mm A052A 2.5m x 1.25m 2.00 mm 35
R20.00 mm T28.00 mm A202A 2.5m x 1.25m 2.00 mm 46
R10.00 mm T15.00 mm A100A 2.5m x 1.25m 2.00 mm 40
R3.00 mm T5.00 mm A031A 2.5m x 1.25m 1.50 mm 33
Aluminium Sheet Types

Leading Aluminium Sheet Manufacturer in India provides various Shapes and Types worldwide as per Customers Requirement.

Aluminum Plate

Aluminum Plate

1 8 Inch Aluminum Sheet

1 8 Inch Aluminum Sheet

4x8 Aluminum Mesh

4x8 Aluminum Mesh

1100 Aluminum Foil Sheet

1100 Aluminum Foil Sheet

4047 Aluminum perforated Sheet

4047 Aluminum perforated Sheet

4x8 Aluminum Coil

4x8 Aluminum Coil

Polished Aluminum Strip

Polished Aluminum Strip

5mm Aluminium Flat Sheet

5mm Aluminium Flat Sheet

1 16 Aluminum Foils

1 16 Aluminum Foils

2mm Aluminium Shim Stock

2mm Aluminium Shim Stock

Aluminium Clad Plate

Aluminium Clad Plate

Aluminium Alloy Chequered Plate

Aluminium Alloy Chequered Plate

Difference Between Aluminum Sheet Vs Plate
Aluminium Sheet Aluminum Plate
  • Thickness : 0.2mm-2.0mm
  • Application: roofing, gutters, and automobile body panels
  • 25.0mm-200mm
  • Application: ships, railcars, military vehicle armor
  • Raw material: ingots
Is Aluminum Sheet Easy to Weld?
  • Yes, Alu Sheet Has Great Weldability
Aluminum Plate Grades
5454 Aluminum Plate

5454 Aluminum Plate

2014 Aluminum Plate

2014 Aluminum Platec

5083 Aluminum Plate

5083 Aluminum Plate

Aluminium 7075 Plate

Aluminium 7075 Plate

2017 Aluminum Plate

2017 Aluminum Platec

Aluminium 6082 T6 Plate

Aluminium 6082 T6 Plate

5086 Aluminum Sheet

5086 Aluminum Sheet

5052 Aluminum Sheet

5052 Aluminum Sheetc

6061 T6 Aluminum Sheet

6061 T6 Aluminum Sheet

Polished Aluminum Sheet Width Tolerance
Thickness Width Tolerance (+ or -) for Given Widths
500 to 1000 1001 to 2000 2001 to 3500
0.20 to 3.0 2.0 3.0 4.0
Click Here For Latest 1mm, 2mm and 3mm Aluminium Sheet Price Per Sq Ft
Stockist of Aluminium Coils and Thin Aluminum Sheet in H14 and H32 Temper for Industrial Use
3003 Aluminum Sheet Applications
3003 Aluminum Sheet Applications

Aluminium Sheet Temper
Temper Hardness
0 Soft
H?4 1/2 hard
H?2 1/4  hard
H?8 Hard
H?6 3/4  hard
Aluminium Sheet Size Chart
Standard Sizes Thickness (mm)
Length x Width 4.0 6.0 5.0 10.0 8.0 15.0 12.0 16.0
3000 x 1500 48.780 73.170 60.975 121.950 97.560 - 146.340 195.120
2500 x 1250 33.875 50.813 42.344 84.688 67.750 127.031 101.625 135.500
4000 x 2000 - 130.080 108.400 216.800 173.440 - 260.160 346.880
Heat Treatable and Non-heat Treatable Alloys of Cold Rolled Aluminum Plate
Alloy Treatable/Non-treatable
1. Non-heat treatable
3. Non-heat treatable
2. Heat treatable
6. Heat treatable
5. Non-heat treatable
7. Heat treatable
Aluminium Roofing Sheet Chemical Composition
Alloy % Mn % Cu % Fe % Si % Al % Mg % Zn % Cr % Others % Ti
EN AW-1050 A 0.05 Maximum 0.05 Maximum 0.40 Maximum 0.25 Maximum 99.5 Min 0.05 Maximum 0.07 Maximum 0.05 Maximum
EN AW-2011 5.00 – 6.00 0.70 Max 0.40 Max Remainder 0.30 Max Bi : 0.20 – 0.60 Pb : 0.20 – 0.60
EN AW-1070 A 0.03 Maximum 0.03 Maximum 0.25 Maximum 0.20 Maximum 99.7 Min 0.03 Maximum 0.07 Maximumimum 0.03 Maximum
EN AW-2014 0.40 – 1.20 3.90 – 5.00 0.70 Max 0.50 – 1.20 Remainder 0.20 – 0.80 0.25 Max 0.10 Max 0.15 Max
EN AW-1100 0.05 Maximum 0.05 – 0.20 Si+Fe 0.95 Maximum 99.0 Min 0.10 Maximum 0.05 Maximum
EN AW-3003 1.00 – 1.50 0.05 – 0.20 0.70 Max 0.60 Max Remainder 0.10 Max 0.15 Max
EN AW-2024 0.30 – 0.90 3.80 – 4.90 0.50 Max 0.50 Max Remainder 1.20 -1.80 0.25 Max 0.10 Max 0.15 Max 0.15 Max
EN AW-6101A 0.03 Maximum 0.05 Maximum 0.40 Maximum 0.30 – 0.7 Remainder 0.40 – 0.90 0.10 Maximum
EN AW-3103 0.90 – 1.50 0.10 Maximum 0.70 Maximum 0.50 Maximum Remainder 0.30 Maximum 0.20 Maximum 0.10 Maximum 0.10 Maximum
EN AW-6060 0.10 Maximum 0.10 Maximum 0.10 – 0.30 0.30 – 0.60 Remainder 0.35 – 0.60 0.15 Maximum 0.05 Maximum 0.10 Maximum
EN AW-6005 0.10 Max 0.10 Max 0.35 Max 0.60 – 0.90 Remainder 0.40 – 0.60 0.10 Max 0.10 Max 0.10 Max
EN AW-6061 0.15 Max 0.15 – 0.40 0.70 Max 0.40 – 0.80 Remainder 0.80 – 1.20 0.25 Max 0.04 – 0.35 0.15 Max
EN AW-6351 0.40 – 0.80 0.10 Maximum 0.50 Maximum 0.70 – 1.30 Remainder 0.40 – 0.80 0.20 Maximum 0.15 Maximum 0.20 Maximum
EN AW-6082 0.40 – 1.00 0.10 Max 0.50 Max 0.70 – 1.30 Remainder 0.60 -1.20 0.20 Max 0.25 Max 0.10 Max
EN AW-6063 0.10 Max 0.10 Max 0.35 Max 0.20 – 0.60 Remainder 0.45 – 0.90 0.10 Max 0.10 Max 0.10 Max
Perforated Aluminum Sheet Equivalent Grades
European
Standard		 GERMANY
(DIN)		 BS (OLD) ISO USA (AA) Canadian IS
EN AW-1070 A Al-99.7 – Al-99.7 1070 19700
EN AW-2011 AlCuBiPb FC1 AlCu6BiPb 2011 28S –
EN AW-1050 A Al99.5 1E Al99.5 1050 1 S 19500, 19501
EN AW-2024 AlCuMg2 – AlCu4Mg1 2024 24 S
EN AW-1100 Al-99.0 IC Al-99.0 1100 2 S 19000
EN AW-3103 – AlMn1 3103 –
EN AW-2014 AlCuSiMn HE15 AlCu4SiMg 2014 B26S 24345
EN AW-6005 AlMgSi0.7 AlSiMg 6005 C51S 62400
EN AW-6101A E AlMgSi 0.5 E91E E AlMgSi(A) 6101 D50S 63401
EN AW-3003 AlMnCu N3 AlMn1Cu 3003 3 S 31000
EN AW-6351 AlMgSi1 HE30 AlSiMg0.5Mn 6351 B51S 64430
EN AW-6060 AlMgSi 0.5 AlMgSi 6060 –
EN AW-6063 AlMgSi0.5 HE9 AlMg0.7Si 6063 50S 63400
EN AW-6082 AlMgSi1 HE30 AlSi1MgMn 6351 B51S 64430
Aluminium Steel Plate Mechanical Properties
Alloy Temper Yield Strength (Mpa) Elongation (%) UTS (Mpa)
Maximum Minimum A 50mm (Minimum) Maximum Minimum
EN AW-1050 A Sheet F 20 23 60
O 20 23 95 60
EN AW-2011 Sheet T4 125 12 275
T6 230 6 310
EN AW-1070 A F 20 23 60
EN AW-2014 O 135 10 250
T4 230 11 370
T6 370 5 415
EN AW-1100 O 25 110 75
EN AW-3003 Mesh Sheet F 35 20 95
O 35 20 135 95
EN AW-6101A Shim Sheet T6 170 8 200
EN AW-2024 Perforated Sheet O 150 10 250
T3,T3511,T3510, 290 6 395
T8, T8511, T8510, 380 4 455
EN AW-6351 Sheet O 110 12 160
T4 110 12 205
T6 250 6 290
EN AW-6060 T4 14 60 12 120
T5 120 6 160
T6 150 6 190
T64 120 10 180
T66 160 6 215
EN AW-3103 Sheets F 35 20 95
O 35 20 135 95
EN AW-6061 O 110 14 150
T4 110 13 180
T6 240 6 260
EN AW-6082 O 110 12 160
T4 110 12 205
T5 230 6 270
T6 250 6 290
EN AW-6005 Sheet T4 90 13 180
T6 225 6 270
EN AW-6063 O 16 130
T4 65 12 130
T5 130 6 175
T6 170 6 215
T66 200 6 245
3003 Aluminum Rolls Physical Properties
Density 2.69 g/cm³
Proof Stress 120 Min MPa
Melting Point 625 °C
Elongation 14 Min %
Modulus of Elasticity 70 GPa
Thermal Expansion 25 x10^-6 /K
Electrical Resistivity 0.044 x10^-6 Ω .m
Thermal Conductivity 134 W/m.K
1100 Aluminum Foils Length Tolerance
Thickness Length Tolerance (+ or -) for Given Lengths
Up to 1000 1001
to 2000		 10,001
to 12,500		 2001
to 3001		 3001
to 5000		 5001
to 7500		 7501
to 10,000		 12,501
to 15,001
0.20 to 3.00 2.0 3.0 8.0 4.0 5.0 6.0 7.0 9.0
Aluminium Chequered Plate Manufacturing Process
Aluminium Chequered Plate Manufacturing Process
Aluminum Alloy Strip Code Derivative
Alloy series Major alloying element
1. Pure aluminium (99.0% and greater)
4. Silicon is major addition
2. Copper is major addition
5. Magnesium is major addition
3. Manganese is major addition
7. Zinc is the major addition
6. Magnesium and silicon are major additions
8. Other Alloys
Alu Checker Plate Thickness Tolerance
Thickness (mm) 2501 to 3000 1501 to 2000 501 to 1000 2001 to 2500 1001 to 1500
1.21 to 1.60 0.30 0.18 0.09 0.24 0.14
2.51 to 3.00 0.42 0.26 0.13 0.36 0.20
2.01 to 2.50 0.38 0.22 0.11 0.32 0.16
Width Tolerances for Aluminium Slit Coil
Specified Thickness (") Specified Width (")
Over 12 Thru 24 Up Thru 6 Over 24 Thru 48 Over 6 Thru 12
0.126-0.186 1/32 0.012 3/16 1/32
0.006-0.125 1/32 0.01 3/64 1/64
Aluminum Sheet HSN Code
Product Country HS CODE
ALUMINIUM SHEET  China 76061190
ALUMINIUM CLADDING SHEETS Sri Lanka 76069290
ALUMINIUM PLATE   Germany 76069190
ALUMINIUM ALLOY SHEET Austria 76061200
ALUMINIUM SHEET Taiwan 76061190
Aluminium Tread Plate Grades
Aluminium Series Grades
2000 Series 2014
8000 Series –
1000 Series 1050 / 1200
3000 Series 3013
4000 Series 4343 / 4015
6000 Series 6063 / 6082
5000 Series 5251
Aluminium Plate Client Reference
Country Country Nmae Delivery time
South Africa South Africa 25-30
Saudi Arabia Saudi Arabia 7
USA USA 40-60
Spain Spain 30
Germany Germany 20
Egypt Egypt 18
Kenya Kenya 19
Vietnam Vietnam 10
Italy Italy 30

Steel Sheet & Plate

Other Sheets

Other Products

Why Aesteiron?

  • Distributor of USA, Japan and European Mills for Seamless Pipes and Steel Plates
  • Only Indian Company who has Weekly 3 Shipment to Saudi Arabia, Netherlands and USA
  • Vast experience as an Exporter of Industrial Long and Flat Products in India
  • Keep Ex-Stock of Nickel Alloys Make Special Metals, USA
  • Supply Europe, USA, Japan and Korea Origin Material
  • Local Distributor in Houston (USA)
  • 350+ Clients in Atlanta, California, Wisconsin, Texas, Kansas, Indiana, Florida
  • Get Price, availability, and shipping information Via WhatsApp and Email in Maximum 2 Hrs
  • DFARS compliant Pipe, Fittings and Sheets for oil and gas companies
  • Weekly Delivery in Tanzania, Sharjah, Dubai, Qatar and Cape Town
  • Special Price for Steel Suppliers, Wholesalers, Importer, Stockholder, Traders and Stockist in USA
  • Known for Best quality of Steel Fittings, Flanges and Pipes
  • Offer MTC 3.1/3.2 and Third Party Inspection at Lowest Price
  • Specialized in supplying Large Diameter Steel Pipes with wear-resistant coating
Visit Factory

Visit Factory

Project Reference

Project Refrence

Tools & Downloads

Facts

Aluminium Sheet offers excellent Strength and Properties and are used in Various Applications.

Request a Quote

whatsapp chat