
347 Stainless Steel Sheet
Aesteiron is one of the renowned 347 Stainless Steel Sheet Suppliers and 347 plate suppliers. We offer it in different sizes, dimensions, thickness and shapes. 347 Stainless Steel Plates are little better corrosion resistance against 321 stainless steel plates in strongly oxidizing environment. It is stabilized with columbium and due to its good resistance to intergranular attack it is preferable for aqueous and low temperature environments.AISI 347 plate has good resistance to polythionic acid stress corrosion cracking, encountered in oil refineries. Its high temperature oxidation resistance is similar to that of aisi 304 plate. 347h stainless steel sheets can be welded by resistance and fusion methods. It’s forging, upsetting and other hot work processes can be performed at 1149 - 1232°C. ASTM A240 Type 347 coil has good creep strength up to 1500°F. It provides good corrosion resistance in applications where the temperature is range is 2100°F to 2250°F. And it has to be annealed and water quenched to obtain its maximum hardness. ASTM A240 Gr 347 strips are useful in applications such as airplane exhaust stacks, jet engine parts, tubing, annealing box covers, etc. SA240 Type 347 perforated sheet is made through the method of “die and punch” perforating. A sheet with needles is continuously pressed onto the passing sheet which punches holes into the sheet. From the punching the remaining pieces are sheared off and the surface gets smoothed. SA240 347H Foil is little tougher than sa240 304 foil. Its hardenability can be minimized by constant positive feeds and slow speeds
Description | ASTM A240 / ASME SA240 Stainless Steel Plates, ASTM A240 Hot Rolled Stainless Steel Plates |
Standard | ASTM, ASME, BS, DIN, EN |
Material | 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L, |
302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc | |
Specification | Cold rolled: 1219mm * 2438mm (4′ x 8′), 1219mm * 3048mm (4′ x 10′), 1220mm * 2440mm, 1250mm * 2500mm or as your requirement.
Hot rolled: 1500mm * 2000mm, 1000mm * 3000mm, 1500mm * 4000mm, 1500m * 6000mm or as your requiremnt. |
Technique | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Form | Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Etc. |
Surface | 2B, 2D, BA, NO. 1, NO. 4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching |
Thickness | 0.25-200mm, 0.3mm to 120mm |
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm |
Package | Standard Export Seaworthy Package, or as required. |
Value Added Services | Cladding,Heat Treatment,Annealed, Pickling, Polish,Rolling,Cutting,Bending,Forging,Minor Fabrication Etc. |
MTC | Mill Test Certificate, Available as per EN 10204 3.1 |
Type | Description | USA FOB Price | Malaysia FOB Price | Europe FOB Price | Singapore FOB Price | Saudi Arabia (KSA) FOB Price | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | Unit Per mtr | |||||||
347 stainless steel sheet | Size : 12swg x 1000 x 2000 | US $ | 5.21 | Malaysia Ringgit | 21.20 | Euro | 4.38 | Singapore Dollar | 6.98 | Saudi Riyal | 19.54 |
347 Stainless Steel Sheet
Aisi 347 Plate
Astm A240 Type 347 Coil
Astm A240 Gr 347 Strips
Sa240 Type 347 Perforated Sheet
347 Stainless Steel Plate
NOMINAL DECIMAL | STANDARD VARIANCE FROM | |
---|---|---|
METAL GAUGE | (APPROXIMATE INCHES) | NOMINAL DECIMAL (+/- INCHES) |
7 | 0.1793 | 0.0080 |
8 | 0.1644 | 0.0080 |
9 | 0.1495 | 0.0080 |
10 | 0.1345 | 0.0070 |
11 | 0.1196 | 0.0050 |
12 | 0.1046 | 0.0050 |
13 | 0.0897 | 0.0050 |
14 | 0.0747 | 0.0040 |
15 | 0.0673 | 0.0040 |
16 | 0.0598 | 0.0030 |
17 | 0.0538 | 0.0030 |
18 | 0.0478 | 0.0030 |
19 | 0.0418 | 0.0030 |
20 | 0.0359 | 0.0030 |
21 | 0.0329 | 0.0025 |
22 | 0.0299 | 0.0020 |
23 | 0.0269 | 0.0020 |
24 | 0.0239 | 0.0020 |
25 | 0.0209 | 0.0015 |
26 | 0.0179 | 0.0015 |
28 | 0.0149 | 0.0010 |
Gauge | LB/Sq. Ft. | LB/Sq In. | Gauge Tolerance | ||
---|---|---|---|---|---|
72″ Wide | 96″ Wide | ||||
3/16 | 0.1875 | 8.579 | 0.05958 | +.045″ -.010″ | +.050″ -.010″ |
7/32 | 0.2187 | 9.870 | 0.06854 | ||
1/4 | 0.2500 | 11.162 | 0.07750 | ||
5/16 | 0.3125 | 13.746 | 0.09546 | ||
3/8 | 0.3750 | 16.496 | 0.11456 | +.055″ -.010″ | +.060″ -.010″ |
7/16 | 0.4375 | 19.080 | 0.13250 | ||
1/2 | 0.5000 | 21.633 | 0.15044 | ||
9/16 | 0.5625 | 24.247 | 0.16838 | ||
5/8 | 0.6250 | 26.831 | 0.18633 | ||
11/16 | 0.6875 | 29.415 | 0.20427 | ||
3/4 | 0.7500 | 32.123 | 0.22308 | +.060″ -.010″ | +.065″ -.010″ |
13/16 | 0.8125 | 34.707 | 0.24102 | ||
7/8 | 0.8750 | 37.291 | 0.25897 | ||
15/16 | 0.9375 | 39.875 | 0.27691 | ||
1 | 1.0000 | 42.665 | 0.29628 | +.070″ -.010″ | +.075 -.010″ |
1-1/8 | 1.1250 | 47.833 | 0.33217 | ||
1-1/4 | 1.2500 | 53.001 | 0.36806 | ||
1-3/8 | 1.3750 | 58.169 | 0.40395 | ||
1-1/2 | 1.5000 | 63.337 | 0.43984 | ||
1-3/4 | 1.7500 | 73.672 | 0.51161 | ||
2 | 2.0000 | 84.008 | 0.58339 | +.125″ -.010″ | +.150″ -.010″ |
2-1/8 | 2.1250 | 89.610 | 0.62229 | ||
2-1/4 | 2.2500 | 94.777 | 0.65817 | ||
2-1/2 | 2.5000 | 105.113 | 0.72995 | ||
2-3/4 | 2.7500 | 115.449 | 0.80173 | ||
3 | 3.0000 | 126.301 | 0.87709 | +.150″ -.010″ | +.160″ -.010″ |
3-1/2 | 3.5000 | 146.972 | 1.02064 | ||
4 | 4.0000 | 168.264 | 1.16850 | +.180″ -.010″ | +.200″ -.010 |
Type | Grade | ASTM A240 Chemical Composition | |||||||||
ASTM(A240M) | Others(JIS) | C | Si | Mn | P | S | Ni | Cr | Mo | Others | |
Austenitic Steels | |||||||||||
347 | SUS347 | ≤0.08 | ≤0.75 | ≤2.00 | ≤0.045 | ≤0.030 | 9.0/13.0 | 17.0/19.0 | ― | Nb:10ʷC/1.00 |
Type | Mechanical Properties for Stainless Steel Plates, Stainless Steel Sheet | |||||||
ASTM(A240M) | Others(JIS) | Tensile Properties | Hardness | |||||
Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation (%) | HBW | HRBW | ||||
Austenitic Steels | ||||||||
347 | SUS347 | ≥205 | ≥515 | ≥40 | ≤201 | ≤92 |
Density ( g.cm-3 ) | 7.93 |
Melting point (°C ) | 1400-1425 |
AISI 347 Plate manufacturer