Duplex 2205 Plate

Duplex Stainless Steel Plate

Duplex Stainless Steel Sheet and SAF 2205 Strips supplier in India

ISO Certified Duplex Stainless Steel Plate Manufacturer in India, Buy duplex 2205 stainless steel sheet at best price in Mumbai

Duplex 2205 plates are extensively used in applications that require good corrosion resistance and strength. At temperatures above 300°C, the brittle micro-constituents of it undergo precipitation, and at temperatures below -50°C the micro-constituents undergo ductile-to-brittle transition; hence this it is not suitable for use the above temperatures.

duplex 2205 stainless steel sheet exhibits excellent corrosion resistance, much higher than that of grade 316. It withstands localized corrosion types like intergranular, pitting and crevice.

Duplex steel plates are resistant to chloride stress corrosion cracking at 150°C temperature. It is an appropriate replacement to austenitic grades, especially in marine environments and premature failure environments.

duplexss plate has high oxidation resistance property is spoiled by its embrittlement above 300°C.By a full solution annealing treatment this embrittlement can be modified. It performs well at temperatures below 300°C. The best suited heat treatment of duplex sheet is the solution treatment, between 1020 - 1100°C, followed by rapid cooling. It can be work hardened but cannot be hardened by thermal methods.

Most standard welding methods is used for duplex steel sheet except welding without filler metals, which results in excess ferrite. Adequate austenite is added to the structure is ensured by adding nitrogen to the shielding gas. Its heat input must be maintained at a low level, and the use of pre or post heat must be avoided. The advantage to choose 2205 duplex stainless steel plate manufacturer is to get 10% lower price compare to stockist and supplier in Mumbai and Prime quality material with manufacturer Mill test Certificate.

The machinability of duplex stainless steel sheet is low due to its high strength and its cutting speeds are almost 20% lower than that of 304 stainless steel.

duplex steel grade 2205 typical application are processing equipment, high chloride and marine equipment, transport, storage and chemical processing. liquor tanks, paper machines , pulp and paper digesters.

Duplex Stainless Steel Plate Price List

2205 duplex stainless steel plate price

Type Description USA FOB Price Malaysia FOB Price Europe FOB Price Singapore FOB Price Saudi Arabia (KSA) FOB Price
    Unit Per mtr Unit Per mtr Unit Per mtr Unit Per mtr Unit Per mtr
Duplex 2205 plates Size : 6.0mm x 1500 x 3000 US $ 3.44 Malaysia Ringgit 14.00 Euro 2.89 Singapore Dollar 4.61 Saudi Riyal 12.90
Duplex steel plates Size : 8.1mm x 1250 x 1250 duplex 31803/32205 US $ 3.45 Malaysia Ringgit 14.04 Euro 2.90 Singapore Dollar 4.62 Saudi Riyal 12.94

Specifcation of Duplex Steel Plate

Manufacturer and supplier of Duplex steel plates and duplex steel sheet in India, view weight chart, dimensions and Specifcation

Material Duplex 2205 Sheet and Plate
Duplex 2205 Sheet & Plate Specification ASTM A240/ SA240
Duplex 2205 Plate Tolerances of Width and thickness
  • EN 10258
  • EN 10151 Duplex 2205 strip for springs
  • EN 10088 Duplex 2205 strip (general)
Standard Duplex 2205 Plate & Sheet Sizes 1000 x 2000 MM, 1220 x 2440 MM, 1500 x 3000 MM, 2000 x 2000 MM, 2000 x 4000 MM
SA-240 Duplex 2205 Plate & Sheet Thickness 0.1 MM - 100 MM Thick
Width 10 To 2500 MM
Duplex SA 240 Type 2205 Plate & Sheet Length 2m, 2.44m, 3m, or as required
SA 240 GR 2205 Duplex Plate & Sheet Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, BA NO(8), SATIN (Met with Plastic Coated), No.1 finish hot rolled 2205 Duplex Plate, 1D, 2B, 2D, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Duplex SA 240 TP 2205 Plate & Sheet Hardness Quarter Hard, Half Hard, Soft, Hard, Spring Hard duplex plate suppliers
Duplex Stock available in form of Plate, Sheet, Coils, Foils, Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate Manufacturer and duplex 2205 plate suppliers
Profiling of Duplex 2205 Plate

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Avesta 2205 Plate & Sheet Manufacturers Jindal, Sail, Outokumpu, Shah Alloys, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO
Duplex 2205 Plasma profiles As per customer's drawings
Value added services for Duplex 2205 Sheet & Plate Waterjet cutting, Plasma cutting, Laser cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.
Value added services for Duplex 2205 Coil
  • Cut-to-length
  • Polishing
  • Slitting
  • Blanking
Specialized Supplier
  • ASTM A240 Type Duplex 2205 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • ASTM A240 Grade 2205 Duplex Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • ASTM A240 Type Duplex 2205 Clad plate: ASTM A240 Type Duplex 2205 Clad plate is a composite steel plate made by bonding ASTM A240 Type Duplex 2205 plate, etc.
  • ASTM A240 Type Duplex 2205 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.

Various duplex plate suppliers, stockist, distributors, exporters, importers, dealers, and stockholders procure the material good deal from Aesteiron and supply in their own countries with high margin, so always buy directly from 2205 duplex stainless steel plate manufacturer in India to get the best price. Contact us now for Free quote !!!

Types of Duplex 2205 plates

Duplex Stainless Steel Plate
SAF 2205 Plate
Duplex 2205 Sheet
Duplex Steel Plate
Duplex Ss Plate
Duplex Stainless Steel Sheet
10mm thickness ss 2205 duplex stainless steel sheet plate
hot rolled 2mm 2205 DSS sheet
2205 Austenitic-Ferritic DSS Plates
2205 S32205 Dss sheet plates
10mm Thickness Ss 2205 Dss Plates
DSS 2205 10mm plates
Cold rolled duplex steel 2205 Plate
Asme sa240 DSS 2205 10mm plates
2b finish DSS plain plates

duplex steel sheet Chemical Composition Chart

Grade UNS No C Cr Ni P Si S Mo N Mn
31803 S31803 < 0.03 21.0-23.0 4.5-6.5 1.03 max 1 max 0.02 max 2.5-3.5 0.08-0.2 < 2.0
2205 S32205 < 0.03 22.0-23.0 4.5-6.5 0.03 max 1 max 0.02 max 3.0-3.5 0.14-0.20 < 2.0

Mechanical Characteristics of SAF 2205 Plate

Buy from duplex stainless steel sheet manufacturers in India for better price and quality, Check duplex 2205 plate properties and updated price list
Grade YS (MPa) UTS (MPa) % Elongation Hardness(BHN)
31803 450 min. 620 min. 25 min. 293 max.
2205 450 min. 655 min. 25 min. 293 max.

Duplex Stainless Steel Plate Material Equivalent

STANDARD WERKSTOFF NR. UNS
Duplex 2205 Plate
1.4462 / 1.4462
UNS S31803 / UNS S32205

Physical Properties of Duplex Stainless Steel Plate

Density (Kg / M3) Modulus of Elasticity (GPa) Poisson’s Ratio Thermal Conductivity (W/moC) Thermal Capacity (I/KgoC) Electrical Resistivity
7800 200 0.3 15 500 0.80

Dimension standards of duplex stainless steel sheet

Manufacturer and supplier of duplex steel 2205 plate, duplex 2205 steel plate, view 2205 duplex stainless steel plate price price list, duplex 2205 steel plate weight and duplex 2205 plate properties
Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin paSSed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

Sizes of SAF 2205 Plate

Size in inches Size (MM)
.125 3.18
.134 3.40
.156 3.96
.187 4.75
.250 6.35
.312 7.92
.375 9.53
.500 12.7
.625 15.9
.750 19.1
.875 22.2
1 25.4
1.125 28.6
1.250 31.8
1.500 38.1
1.750 44.5
2 50.8
2.500 63.5
3 76.2

Duplex 2205 plates Weight Chart

duplex 2205 density

Thickness Plate Weight per Unit Area lbs/in² and kg/m² Density
3/16 0.06000 42.184176 0.315 / 8.72
1/4 0.08 / 56.245568 0.315 / 8.72
3/8 0.121 / 85.0714216 0.315 / 8.72
1/2 0.161 / 113.1942056 0.315 / 8.72
5/8 0.196 / 137.8016416 0.315 / 8.72
3/4 0.235 / 165.221356 0.315 / 8.72
7/8 0.274 / 192.6410704 0.315 / 8.72
1 0.313 / 220.0607848 0.315 / 8.72
1 1/4 0.391 / 274.9002136 0.315 / 8.72
1 1/2 0.47 / 330.442712 0.315 / 8.72
1 3/4 0.549 / 385.9852104 0.315 / 8.72
2 0.627 / 440.8246392 0.315 / 8.72
2 1/4 0.705 / 495.664068 0.315 / 8.72
2 1/2 0.784 / 551.2065664 0.315 / 8.72
2 3/4 0.862 / 606.0459952 0.315 / 8.72
3 0.941 / 661.5884936 0.315 / 8.72

Duplex 2205 plate thickness

Duplex 2205 Plate Thickness (mm) Duplex 2205 Plate Dimensions
1.5 3m x 1.5m
2.0 3m x 1.5m
3.0 3m x 1.5m
5.0 3m x 1.5m / 4m x 2m
6.0 3m x 1.5m / 4m x 2m / 6m x 2m
8.0 3m x 1.5m / 4m x 2m / 6m x 2m
10.0 3m x 1.5m / 4m x 2m / 6m x 2m
12.0 3m x 1.5m / 4m x 2m / 6m x 2m
15.0 4m x 2m / 6m x 2m
20.0 4m x 2m / 6m x 2m

whatsapp chat